PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operands<br />
4.5.2.1. Operand specifiers<br />
I 03 a 02 .5<br />
Channel number 0...7 (bit)<br />
Group address 00...max. 99 (byte)<br />
PROFIBUS line address<br />
Station address 00...99<br />
Type (I=input, BI=byte input, O=output, BO=byte output)<br />
Type<br />
These are the signals that <strong>PC</strong> <strong>Control</strong> <strong>645</strong>-<strong>12M</strong> sends to<br />
and receives from its communication partner.<br />
- Inputs are read in via PROFIBUS<br />
- Outputs are controlled via PROFIBUS<br />
Station address<br />
Address of the PROFIBUS communication partner. <strong>PC</strong><br />
<strong>Control</strong> <strong>645</strong>-<strong>12M</strong> can communicate with up to 64 communication<br />
partners. Their addresses are to be between<br />
00 and 99.<br />
PROFIBUS line address<br />
Always "a" for <strong>PC</strong> <strong>Control</strong> <strong>645</strong>-<strong>12M</strong>.<br />
Group address<br />
A group consists of 8 channels (0...7), up to 99 groups<br />
are possible by default 1) .<br />
Channel number<br />
Only applies to bit addressing. The channel number corresponds<br />
to the channel number within the specified<br />
group, i.e. to the input or output.<br />
1)<br />
Exception for the number of group addresses:<br />
KUBES module PB_COPY allows you to communicate with DP slaves which are<br />
equipped with a larger number of I/O bytes. The extra bytes are copied to byte<br />
marker ranges.<br />
4 - 20