PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Preparations<br />
4.2.1. Online V.24<br />
Choose this type of on-line connection if <strong>PC</strong> <strong>Control</strong> <strong>645</strong>-<br />
<strong>12M</strong> is not plugged into the <strong>PC</strong> on which KUBES is running.<br />
Plug one end of the programming cable (part no.<br />
657.151.03) into the appropriate female connector on <strong>PC</strong><br />
<strong>Control</strong> <strong>645</strong>-<strong>12M</strong>, and the other end into the <strong>PC</strong>'s COM<br />
port that was defined for that during KUBES installation<br />
(see "PROFISOF.INI" file in the Windows directory).<br />
For interface and programming cable information see chapter<br />
"3.5.1. V.24 interface"<br />
V.24 settings in KUBES<br />
-- "PLC" menu<br />
-- option "Setup - V.24 parameters"<br />
4 - 10<br />
-- <strong>PC</strong> port: COM1 - COM2<br />
-- transfer rate: 9600...57600 baud<br />
-- parity check: even - odd - no<br />
The suggested settings result in the following entries in<br />
PROFISOF.INI:<br />
SPS=COM1:<br />
V24-PARAM=9600,o,8,1<br />
<strong>PC</strong> <strong>Control</strong> <strong>645</strong>-<strong>12M</strong> supports transfer rates of up to<br />
57600 kbit/s<br />
To establish the online connection<br />
-- "PLC" menu<br />
-- option "ONLINE - V.24"