PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke PC Control / Profi Control 645-12M Instruction Manual pdf - Kuhnke
Preparations -- and then on "Select modules". -- In the box on the left panel, double-click on the requierd I/O module ("DI16/DO16"); it appears in the "Plugged-in modules" list -- Accept this entry and click on OK to return to the "DP options" dialog -- In the "DP options" dialog, click on "Set parameters" -- Set the parameters as required -- Click on OK to accept the settings. The "Define station" dialog is displayed again Following this procedure through is absolutely necessary even if you intend to use the standard settings. Communication will otherwise fail later. 4 - 6
PC Control 645-12M used as PLC The "Define station" dialog should now look as follows: Profi I/O 690E+ is fully functional with these parameter settings. We do not want to deal with other settings, such as the diagnosis memory, at this point because they're not really part of the subject. Please refer to the following instruction manuals VEBES (E 315 GB) and Profi I/O 690E+ (E 408 GB). 4 - 7
- Page 1 and 2: Kuhnke Electronics Instruction Manu
- Page 3 and 4: Table of contents Table of contents
- Page 5 and 6: Table of contents 4.5.2. External o
- Page 7 and 8: Table of contents B. PROFIBUS hardw
- Page 9 and 10: 1. Purpose of PC Control 645-12M In
- Page 11 and 12: Introduction Advantages of decentra
- Page 13 and 14: Introduction VEBES VEBES, the netwo
- Page 15 and 16: 2. Reliability and safety Reliabili
- Page 17 and 18: Reliability / safety 2.4. Safety Ou
- Page 19 and 20: Reliability / safety 2.5. Electroma
- Page 21 and 22: 2.5.5. Protection against external
- Page 23 and 24: 3. Hardware Hardware 3.1. Design 17
- Page 25 and 26: Hardware 3.2.2.1. Uninterrupted swi
- Page 27 and 28: Hardware 3.4.2. Setting the reset t
- Page 29 and 30: Hardware 3.5. Interfaces 3.5.1. V.2
- Page 31 and 32: Hardware 3.6. Memory PC Control 645
- Page 33 and 34: Hardware 3.8.2. How to avoid addres
- Page 35 and 36: Hardware -- Activate the "Memory" o
- Page 37 and 38: Hardware To reserve a memory range
- Page 39 and 40: i n 0 2 4LV o g 0 2 4LV o Sa t da t
- Page 41 and 42: PC Control 645-12M used as PLC 4.1.
- Page 43: PC Control 645-12M used as PLC -- S
- Page 47 and 48: 4.2. Going online with KUBES PC Con
- Page 49 and 50: PC Control 645-12M used as PLC 4.2.
- Page 51 and 52: 4.3. Memory settings PC Control 645
- Page 53 and 54: 4.4. PLC working method PC Control
- Page 55 and 56: 4.5.1.1. Short description of local
- Page 57 and 58: 4.5.2. External operands as process
- Page 59 and 60: PC Control 645-12M used as PLC 4.5.
- Page 61 and 62: 4.5.3.1. Status of PROFIBUS master
- Page 63 and 64: 4.5.3.2. PEaxx.yy: DP slave status
- Page 65 and 66: 4.6. Summary of commands PC Control
- Page 67 and 68: PC Control 645-12M used as PLC 4.6.
- Page 69 and 70: PC Control 645-12M used as PLC 4.6.
- Page 71 and 72: PC Control 645-12M used as PLC 4.6.
- Page 73 and 74: 4.6.4. Shift and rotation commands
- Page 75 and 76: PC Control 645-12M used as PLC 4.6.
- Page 77 and 78: PC Control 645-12M used as PLC 4.6.
- Page 79 and 80: 4.7. Types of operands PC Control 6
- Page 81 and 82: PC Control 645-12M used as PLC 4.8.
- Page 83 and 84: PC Control 645-12M on PROFIBUS 4.9.
- Page 85 and 86: PC Control 645-12M on PROFIBUS PROF
- Page 87 and 88: PC Control 645-12M on PROFIBUS 4.9.
- Page 89 and 90: 4.9.2.3.1. Choosing a station and g
- Page 91 and 92: 4.9.2.4. Service 7: activate/deacti
- Page 93 and 94: 4.9.2.6. Service 6: synchronise DP
<strong>PC</strong> <strong>Control</strong> <strong>645</strong>-<strong>12M</strong> used as PLC<br />
The "Define station" dialog should now look as follows:<br />
<strong>Profi</strong> I/O 690E+ is fully functional with these parameter<br />
settings.<br />
We do not want to deal with other settings, such as the diagnosis<br />
memory, at this point because they're not really<br />
part of the subject.<br />
Please refer to the following instruction manuals<br />
VEBES (E 315 GB) and <strong>Profi</strong> I/O 690E+ (E 408 GB).<br />
4 - 7