CDN Price Guide - Krug

LINKING & CORNER UNITS | OVERHEADS | HUTCHES
LINKING & CORNER UNITS
Linking units are for use between desks and credenzas in creating a U-shaped configuration, and
must be supported at both ends. They are available with a fixed or hinged modesty panel.
A corner unit can be used in a U-shape configuration, or it can be an integral part of an L-shaped
work area with returns linked to either side. Corner units have a standard grommet included in the
back corner for ease of cable management, and also have additional wire management access
grommets in the half gables so that cables can be run to other areas of the connected worksurface.
VIRTU casegood corner units accept 24′′ deep worksurfaces.
OVERHEADS
Single and double high wall mounted overheads come standard with fluorescent tasklights and
mounting hardware.
Fluorescent tasklights are factory installed and require no field adjustment.
Options include wood or matte silver framed frosted glass doors and a wood or matte silver light
rail. Tackboards are also available for use with wall mounted overheads.
Overheads feature a front profiled edge.
HUTCHES
Fluorescent tasklights and a Krug panel fabric grade 1 tackboard come standard on all hutches.
Pier door options include open or closed wood. Pier doors are not available in glass. A wood or
matte silver light rail and a voice power data module are also available.
These features are not available on every hutch. Please see hutch section, pages 119-126 for more
information.
5- and 6-hi hutches come in a variety of combinations. The following chart outlines the number of
doors per hutch size.
60-84′′ 4 doors
96′′ 6 doors
96′′ hutches will have a double partition in the centre.
Project 4 1/2-hi hutches are available with or without a pier.
Project hutches do not have overhead doors. The overhead is comprised of paper manager slots.
Hutches feature a front profiled edge.
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 8.15% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST
22 | CANADA VIRTU