CDN Price Guide - Krug

EDGE DETAIL PROFILES
WORKSURFACE EDGE PROFILE
All worksurfaces are 1 1/8′′ (29mm) thick, veneered particle board. Worksurface profiled edges have an 11/16′′ (17.5mm) wood banding.
VIRTU has four edge profiles to choose from:
‘‘I’’ - Vita ‘‘H’’ - Fino ‘‘L’’ - Venosa ‘‘P’’ - Palermo
Desks
Curvilinear Desks
Curvilinear Returns
Returns and Linking Units
Credenzas
Corner Units and Crescent Tables
Desks have profiles on the front and back edges. Sides are square and the grain runs lengthwise.
Curvilinear desks have profiles on the curved end and the front/back edges of the desk. The straight side edge
does not feature a profile.
The grain runs lengthwise.
Curvilinear returns have profiles on the curved end and the front/back edges of the return. The straight side
edge does not feature a profile.
The grain runs widthwise.
Returns and linking units have flush back and sides and a profile on the front edge.
The grain runs widthwise.
Returns and linking units are coved.
Credenzas have flush back and sides and a profile on the front edge.
The grain runs lengthwise.
Corner units have a profile on the front user side and the connecting edges. The back of the unit is square.
The grain runs diagonal.
Crescent tables have profiles on the front and back edges. Adjoining edges are flush.
The grain runs diagonal.
EFFECTIVE MARCH 1, 2008 A PRICE INCREASE OF 8.15% WILL APPLY TO ALL PRODUCTS IN THIS PRICE LIST
14 | CANADA VIRTU