SUPER DIGITAL

No.
Part name
Procedure
Remarks
9
Pulse Motor Valve
(PMV) coil
1. Detachment
1) Perform works of items 1 and 2 .
PMV body
Positioning extrusion
2) Release the coil from the concavity by
turning it, and remove coil from the PMV.
2. Attachment
1) Put the coil deep into the bottom position.
2) Fix the coil firmly by turning it to the
concavity.
PMV coil
Concavity
10
Fan guard
1. Detachment
1) Perform works of items 1 of 1 and 2 .
Minus screwdriver
2) Remove the front cabinet, and put it down
so that fan guard side directs downward.
XCAUTIONX
Perform works on a corrugated cardboard,
cloth, etc. to prevent flaw on the product.
3) Remove the hooking claws by pushing
with minus screwdriver along with the
arrow mark in the right figure, and remove
the fan guard.
Hooking claw
Front cabinet
2. Attachment
1) Insert claws of the fan guard in the hole of
the front cabinet. Push the hooking claws
(10 positions) with hands and then fix the
claws.
Front cabinet
XCAUTIONX
All the attaching works have completed.
Check that all the hooking claws are fixed
to the specified positions.
Fan guard
– 210 –