SUPER DIGITAL

No.
Part name
Procedure
Remarks
2
Front cabinet
1. Detachment
1) Perform work of item 1 of 1 .
Motor support
2) Remove screws (ST1T Ø4 × 10L, 2 pcs.)
of the front cabinet and the inverter cover.
3) Take off screws of the front cabinet and
the bottom plate. (ST1T Ø4 × 10L 3 pcs.)
4) Take off screws of the front cabinet and
the motor support.
(ST1T Ø4 × 10L, 2 pcs.)
• The left side of the front side if made to
insert to the rear cabinet, so remove it
pulling upward.
Front cabinet
For single-phase type models,
also take off this screw
3. Attachment
Front cabinet (Left side)
1) Insert hook at the left side of the front side
into the rear cabinet.
2) Hook the lower part at the right side of the
front to concavity of the bottom plate.
Insert the hook of the rear cabinet into the
slit of the front cabinet.
3) Attach the removed screws to the original
positions.
Slit
Claw
Slit
Hook
Cord clamp
Front cabinet
Concavity at
bottom plate
Lower
slit
– 205 –