SUPER DIGITAL

12-4-4. Others
1. Selection of LED display (SW800, SW803 operation)
1) Display selection list
The displayed contents of LED D800 to D804 on the outdoor control P.C. board can be exchanged by
operation of SW803.
Switch
SW803
2 3 4
Function / Contents
Error display (Error generating at present)
Error generating at present is displayed.
This switch goes off when an error does not generate.
Refer
Refer to
Page 169.
ON
ON
1
SW803
2 3 4
1
Error display (The latest error: Latest error including present)
After error status was cleared, the error which generated before
can be confirmed by this setting. (Reconfirmation is available
even if power supply was turned off once.)
• If an error generates at present, the same contents as those of
error which is generating at present are displayed.
• Only error of TO sensor is not displayed by this setting.
(Confirm it by setting of error which is generating at present.)
Refer to
Page 169.
TD
SW803
TE
SW803
TS
SW803
Temperature sensor display
The detected value of temperature sensor is displayed.
Refer to
Page 170.
ON
1
2 3 4
TO
SW803
TL
SW803
TH
SW803
ON
1
2 3 4
TA
SW803
TC
SW803
TCJ
SW803
ON
1
ON
1
ON
1
2 3 4
2 3 4
2 3 4
ON
1
ON
1
2 3 4
2 3 4
ON
1
ON
1
2 3 4
2 3 4
SW803
2 3 4
Current display
The current value which flows in the outdoor unit is displayed.
Refer to
Page 170.
ON
1
SW803
SW803
ON
2 3 4
1
ON
2 3 4
Compressor operation frequency display
The operation frequency of the compressor is displayed.
Refer to
Page 170.
1
PMV opening display
The opening of PMV (Pulse Motor Valve) is displayed.
Refer to
Page 170.
– 168 –