SUPER DIGITAL

3. How to set up type of swing
1 Push SWING/FIX for 4 seconds or more during stop of
the operation.
• flashes.
2 Push UNIT LOUVER (At the left side of the button) and
select the unit to be selected.
• Every pushing the button, the unit No. changes.
UNIT No.
1–1
UNIT No.
No display
UNIT No.
1–2
UNIT No.
1–4
UNIT No.
1–3
The fan of the selected unit rotates and the louver swings.
3 Using TIMER SET / buttons, select type of
the swing.
∗ Dual swing
(Recommended for heating operation)
• The adjoined louvers repeat horizontal
discharge/Downward discharge alternately
to clear irregularity of the temperature in
heating operation.
• The vertical discharge spreads hot air to
the floor, and the horizontal discharge stirs.
Both suppress the temperature irregularity.
Horizontal
ontal
discharge
Downward
discharge
Horizontalontal
discharge
Downward
discharge
Horizontalontal
discharge
Downward
discharge
Horizontalontal
Downward
discharge
discharge
Swing setup code
0001
0002
0003
Swing setup code
Louver operation
Standard swing (At shipment)
Dual swing
Cycle swing
∗ Cycle swing
(Recommended for cooling operation)
• 4 louvers swing with time lag as if they
heave.
REQUIREMENT
• Do not set 0000. (Louver may cause a trouble.)
4 Push SET .
5 Push TEST to finish the setup.
∗ Standard swing
Four louvers swing simultaneously with the same
angel.
Swing
– 162 –