THERMOLAST K - Kraiburg TPE
THERMOLAST K - Kraiburg TPE THERMOLAST K - Kraiburg TPE
THERMOLAST ® K DW series – Drinking water TYPICAL APPLICATIONS: seals and functional elements for drinking water contact seals, functional and design elements in sanitary sector shower heads MATERIAL ADVANTAGES: thermoplastic alternative material to elastomers colored compounds available smooth surface and repels dirt and lime deposit soft Compounds 55 ShA – 90 ShA available Adapted for injection moulding and extrusion Adhesion to PP/PE Compound for cold and warm water applications Colour Hardness DIN 53505 / ISO 868 Sh A Density DIN EN ISO 1183-1:2004 g/cm³ Tensile strength 1 DIN 53504 / ISO 37 N/mm² Elongation at break 1 DIN 53504 / ISO 37 % Tear resistance ISO 34-1 method B (b) (Graves) N/mm TF5WKF natural 55 0.89 9 700 15.0 TF6WKF natural 65 0.89 10 800 20 TF7WKF natural 75 0.89 12 700 35 TF8WKF natural 85 0.89 14 700 40 TF9WKF natural 90 0.89 16 700 38 WRAS (BS 6920) for cold- and warm water applications in natural color and colored W270 in natural color and colored compliance regarding ACS DGS/VS4 2000/232 dated 27.4.2000, DGS/VS4 n° 99/217 dated 12.04.99 KTW guideline for 23 °C and 60 °C (or transition regulation of UBA from 21.04.2012 for coldwater 73° F (23°C) and warm water 140°F (60°C) This datasheet is an extract of the KRAIBURG TPE program. Please contact KRAIBURG TPE to select the compound suitable for your requirements. Remark: The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The results of our tests are determined by sample check and mean only a technical description of our products. It shall not absolve the customer of the responsibility to make tests for his intended process or purpose. Therefore, KRAIBURG TPE makes no warranties and assumes no liability in connection with any use of this information. © 2013 by KRAIBURG TPE GmbH & Co. KG, 04.03.2013 KRAIBURG TPE GmbH & Co. KG Friedrich-Schmidt-Strasse 2 D-84478 Waldkraiburg GERMANY subject to change and error check www.kraiburg-tpe.com for the latest version 24
<strong>THERMOLAST</strong> ® K<br />
DW series – Drinking water<br />
TYPICAL APPLICATIONS:<br />
seals and functional elements for drinking water contact<br />
seals, functional and design elements in sanitary sector<br />
shower heads<br />
MATERIAL ADVANTAGES:<br />
thermoplastic alternative material to elastomers<br />
colored compounds available<br />
smooth surface and repels dirt and lime deposit<br />
soft Compounds 55 ShA – 90 ShA available<br />
Adapted for injection moulding and extrusion<br />
Adhesion to PP/PE<br />
Compound for cold and warm water applications<br />
Colour<br />
Hardness<br />
DIN 53505 / ISO 868<br />
Sh A<br />
Density<br />
DIN EN ISO 1183-1:2004<br />
g/cm³<br />
Tensile strength 1<br />
DIN 53504 / ISO 37<br />
N/mm²<br />
Elongation at break 1<br />
DIN 53504 / ISO 37<br />
%<br />
Tear resistance<br />
ISO 34-1 method B (b)<br />
(Graves) N/mm<br />
TF5WKF natural 55 0.89 9 700 15.0<br />
TF6WKF natural 65 0.89 10 800 20<br />
TF7WKF natural 75 0.89 12 700 35<br />
TF8WKF natural 85 0.89 14 700 40<br />
TF9WKF natural 90 0.89 16 700 38<br />
WRAS (BS 6920) for cold- and warm water applications in natural color and colored<br />
W270 in natural color and colored<br />
compliance regarding ACS DGS/VS4 2000/232 dated 27.4.2000, DGS/VS4 n° 99/217 dated 12.04.99<br />
KTW guideline for 23 °C and 60 °C (or transition regulation of UBA from 21.04.2012 for coldwater 73°<br />
F (23°C) and warm water 140°F (60°C)<br />
This datasheet is an extract of the KRAIBURG <strong>TPE</strong> program. Please contact KRAIBURG <strong>TPE</strong> to select the compound suitable for your<br />
requirements.<br />
Remark:<br />
The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication. This information may<br />
be subject to revision as new knowledge and experience becomes available. The results of our tests are determined by sample check and mean<br />
only a technical description of our products. It shall not absolve the customer of the responsibility to make tests for his intended process or<br />
purpose. Therefore, KRAIBURG <strong>TPE</strong> makes no warranties and assumes no liability in connection with any use of this information.<br />
© 2013 by KRAIBURG <strong>TPE</strong> GmbH & Co. KG, 04.03.2013<br />
KRAIBURG <strong>TPE</strong> GmbH & Co. KG Friedrich-Schmidt-Strasse 2 D-84478 Waldkraiburg GERMANY<br />
subject to change and error<br />
check www.kraiburg-tpe.com for the latest version<br />
24
<strong>THERMOLAST</strong> ® K<br />
DW series – Drinking water<br />
Compound for cold and warm water applications– improved compression set<br />
Colour<br />
Hardness<br />
DIN 53505 / ISO 868<br />
Sh A<br />
Density<br />
DIN EN ISO 1183-1:2004<br />
g/cm³<br />
Tensile strength 1<br />
DIN 53504 / ISO 37<br />
N/mm²<br />
Elongation at break 1<br />
DIN 53504 / ISO 37<br />
%<br />
Tear resistance<br />
ISO 34-1 method B (b)<br />
(Graves) N/mm<br />
72h /<br />
23°C<br />
Compression Set<br />
ISO 815<br />
%<br />
22h/<br />
70°C<br />
TF6WCS natural 60 0.93 10 500 12 10 70<br />
TF7WCS natural 70 0.93 15 450 20 12 60<br />
TF8WCS natural 80 0.93 20 400 23 15 65<br />
TF9WCS natural 90 0.93 15 300 30 40 65<br />
WRAS (BS 6920) for cold- and warm water applications in natural color and colored<br />
W270 in natural color and colored<br />
compliance regarding ACS DGS/VS4 2000/232 dated 27.4.2000, DGS/VS4 n° 99/217 dated 12.04.99<br />
KTW guideline for 23 °C and 60 °C (or transition regulation of UBA from 21.04.2012 for coldwater 73°<br />
F (23°C) and warm water 140°F (60°C)<br />
1<br />
Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200mm/min<br />
This datasheet is an extract of the KRAIBURG <strong>TPE</strong> program. Please contact KRAIBURG <strong>TPE</strong> to select the compound suitable for your<br />
requirements.<br />
Remark:<br />
The information provided in this documentation corresponds to our knowledge on the subject at the date of its publication. This information may<br />
be subject to revision as new knowledge and experience becomes available. The results of our tests are determined by sample check and mean<br />
only a technical description of our products. It shall not absolve the customer of the responsibility to make tests for his intended process or<br />
purpose. Therefore, KRAIBURG <strong>TPE</strong> makes no warranties and assumes no liability in connection with any use of this information.<br />
© 2013 by KRAIBURG <strong>TPE</strong> GmbH & Co. KG, 04.03.2013<br />
KRAIBURG <strong>TPE</strong> GmbH & Co. KG Friedrich-Schmidt-Strasse 2 D-84478 Waldkraiburg GERMANY<br />
subject to change and error<br />
check www.kraiburg-tpe.com for the latest version<br />
24
Change language