download - Knoll

Doors
rolling door
Morrison
description type w d h pattern no. paint RC C T
Rolling door 64H with lock 36 2 64 MRD-6436-(L/R)-( )-( )-L $2,533. $2,641. $2,848.
42 2 64 MRD-6442-(L/R)-( )-( )-L 2,628. 2,767. 3,002.
48 2 64 MRD-6448-(L/R)-( )-( )-L 2,662. 2,799. 3,032.
64H no lock 36 2 64 MRD-6436-(L/R)-( )-( )-N 2,348. 2,460. 2,666.
42 2 64 MRD-6442-(L/R)-( )-( )-N 2,446. 2,583. 2,819.
48 2 64 MRD-6448-(L/R)-( )-( )-N 2,480. 2,615. 2,853.
80H with lock 36 2 80 MRD-8036-(L/R)-( )-( )-L 2,671. 2,976. 3,287.
42 2 80 MRD-8042-(L/R)-( )-( )-L 2,777. 3,002. 3,303.
48 2 80 MRD-8048-(L/R)-( )-( )-L 2,822. 3,034. 3,349.
80H no lock 36 2 80 MRD-8036-(L/R)-( )-( )-N 2,487. 2,792. 3,106.
42 2 80 MRD-8042-(L/R)-( )-( )-N 2,594. 2,819. 3,120.
48 2 80 MRD-8048-(L/R)-( )-( )-N 2,640. 2,854. 3,166.
Threshold for rolling door 36 door 73 1 /4 3 3
/8 MRD-FT36 193.
42 door 85 1 /4 3 3
/8 MRD-FT42 203.
48 door 97 1 /4 3 3
/8 MRD-FT48 220.
Panel stiffeners for 80H doors 90° 2-way L MM1-DSL2 43.
In-line post MM1-DSP1 43.
Straight MM1-DSS1 43.
Masts for doors (set of 2) AYI-DMK 43.
Post trim covers for 64H door 90° 2-way L 2 1 /4 – 64 MT1-64XL2-( ) 66.
90° 3-way T 2 1 /4 – 64 MT1-64XT3-( ) 49.
Post trim covers for 80H door 90° 2-way L 2 1 /4 – 80 MT1-80XL2-( ) 77.
90° 3-way T 2 1 /4 – 80 MT1-80XT3-( ) 61.
Order Code
Application Notes
Example: MRD-6436-L-C-613-N
M Morrison
RD Rolling door
64 Height
36 Width
L Left
C Door finish
613 Frame finish
N No lock
Specification Information
Specify:
Left / Right Hand
Glazing for rolling door:
C- Clear acrylic
T- Translucent acrylic
RC- Ribbed polycarbonate
Frame finish
Lock / No Lock
Rolling doors mount to the outside
of Morrison workstations.
64H rolling door kit includes door
panel, post with mounting bracket,
and door jamb (for door side
opposite to mounting bracket).
Specify post high-low top cap (see
page ) for Morrison panel adjacent
to the door jamb.
80H rolling door kit includes door
panel, post with mounting bracket,
door jamb (for door side opposite to
mounting bracket), header, top cap
for header and two corner brackets.
Top caps for panels adjacent to 80
rolling doors must be modified in
the field. Header for 80 door
mounts with two corner brackets.
Specify separately straight
connector tracks to connect door
post and door jamb to adjacent
panels.
A full threshold may be specified
separately. A threshold is required
to assure the ADA requirement for
maximum pull force of 5 lbs. is met.
Rolling door post with mounting
bracket must attach to a Morrison
panel, or panel run, of width equal
or greater than the nominal width of
the door. When fully open, the door
will extend 1 3 /16 (half the width of a
universal post) beyond a panel of
corresponding width.
Door jamb may be attached to a
Morrison panel or to a universal
post. When attaching to a post,
specify separately dedicated
vertical trims for 90° 2-way L or
3-way T connections.
Masts for doors combine with panel
stiffeners for 80 doors to mount
stackable add-up panels over
Morrison doors.
42