download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Currents worksurfaces for Morrison<br />
P-shape<br />
3/8 wire drop and grommet<br />
Morrison<br />
description w d h pattern no. lam.<br />
P-shape surfaces, extended left 75 48 1 AWM2 P7548 S ( )( ) $1,096.<br />
87 48 1 AWM2 P8748 S ( )( ) 1,234.<br />
P-shape surfaces, extended right 48 78 1 AWM2 P4875 S ( )( ) 1,096.<br />
48 87 1 AWM2 P4887 S ( )( ) 1,234.<br />
Worksurface Planning<br />
Order Code<br />
Specification Information<br />
Application Notes<br />
Example: AWM2 P7548 S-119-119<br />
AWM2 Worksurface<br />
P P-shape<br />
75 Width left<br />
48 Width right<br />
S Depth of return<br />
119 Top finish<br />
119 Trim finish<br />
Specify top finish first, followed by<br />
trim finish.<br />
Please refer to the Currents price<br />
list for finishes.<br />
Veneer finishes for Currents<br />
worksurfaces for Morrison are<br />
available through Custom Product<br />
Development.<br />
Worksurfaces are sized for Morrison<br />
panel-based applications and may<br />
be supported by Morrison<br />
panel-planning brackets.<br />
P-shaped worksurfaces may be<br />
supported with Morrison brackets or<br />
cantilevered from Currents service<br />
wall along 48 edge, and supported<br />
bya24D Currents C-leg at<br />
conference end. Specify supports<br />
separately.<br />
AWM2- worksurfaces are supported<br />
by brackets with wood screws.<br />
All P-shaped worksurfaces<br />
correspond to a 24D adjacent<br />
straight or corner worksurface.<br />
Currents worksurfaces for Morrison<br />
cannot be used in conjunction with<br />
Morrison Network desk supports.<br />
Actual worksurface depth is 3 /8 less<br />
than nominal for cable clearance.<br />
All worksurfaces include one edge<br />
grommet, centered at rear of<br />
worksurface, with maximum<br />
clearance of 1 5 /8.<br />
For 90 application span, use two<br />
AWB-S42 stiffeners.<br />
For 96 application span, use two<br />
AWB-S48 stiffeners.<br />
Currents worksurfaces for Morrison<br />
require stiffener when the span<br />
between structural supports exceeds<br />
36. Specify worksurface stiffeners<br />
and supports separately (page 142).<br />
When using Morrison end support<br />
brackets, order MB3-EC18, 24 or<br />
30.<br />
141