download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Currents worksurfaces for Morrison<br />
corner<br />
3/8 wire drop and grommet<br />
Morrison<br />
description type w d h pattern no. lam.<br />
Corner worksurfaces 24D both sides 42 42 1 AWM2 C4242 S ( )( ) $618.<br />
48 48 1 AWM2 C4848 S ( )( ) 685.<br />
60 60 1 AWM2 C6060 S ( )( ) 958.<br />
30D both sides 42 42 1 AWM2 C4242 D ( )( ) 618.<br />
48 48 1 AWM2 C4848 D ( )( ) 685.<br />
60 60 1 AWM2 C6060 D ( )( ) 958.<br />
30D left/24D right 42 42 1 AWM2 C4242 L ( )( ) 618.<br />
48 48 1 AWM2 C4848 L ( )( ) 685.<br />
60 60 1 AWM2 C6060 L ( )( ) 958.<br />
24D left/30D right 42 42 1 AWM2 C4242 R ( )( ) 618.<br />
48 48 1 AWM2 C4848 R ( )( ) 685.<br />
60 60 1 AWM2 C6060 R ( )( ) 958.<br />
Order Code<br />
Specification Information<br />
Application Notes<br />
Example: AWM2 C4848S-119-119<br />
AWM2 Worksurface<br />
C Corner<br />
48 Width left<br />
48 Width right<br />
S Depth left and right<br />
119 Top finish<br />
119 Trim finish<br />
Dimensions shown in ‘‘w’’ column<br />
are nominal width of left back edge.<br />
Dimensions shown in ‘‘d’’ column<br />
are nominal width of right back<br />
edge.<br />
Worksurface depths:<br />
S 24D both sides<br />
L 30D left/24D right<br />
R 24D left/30D right<br />
Specify top finish first, followed by<br />
trim finish.<br />
Please refer to the Currents price<br />
list for finishes.<br />
Veneer finishes for Currents<br />
worksurfaces for Morrison are<br />
available through Custom Product<br />
Development.<br />
Worksurfaces are sized for Morrison<br />
panel-based applications and may<br />
be supported by Morrison<br />
panel-planning brackets or<br />
end-supported and cantilevered<br />
from Currents wall. Underside of<br />
worksurfaces is drilled to accept all<br />
Morrison panel-planning brackets,<br />
Morrison and Currents pedestals,<br />
and worksurface stiffeners. 24D<br />
worksurfaces are also drilled to<br />
accept Currents wall cantilever<br />
brackets.<br />
AWM2- worksurfaces are supported<br />
by brackets with wood screws.<br />
When using Morrison end support<br />
brackets, order MB3-EC18, 24 or<br />
30.<br />
Currents worksurfaces for Morrison<br />
require stiffener when the span<br />
between structural supports exceeds<br />
36. Specify worksurface stiffeners<br />
and supports separately (page 142).<br />
Currents worksurfaces for Morrison<br />
cannot be used in conjunction with<br />
Morrison Network desk supports.<br />
Actual worksurface depth is 3 /8 less<br />
than nominal 24 and 30 for cable<br />
clearance.<br />
All worksurfaces include two edge<br />
grommets, centered on back edges<br />
of worksurface, with maximum<br />
clearance of 1 5 /8.<br />
Wood grain laminate is not available<br />
on 60Wx60D corner<br />
worksurfaces.<br />
138
Change language