download - Knoll

Worksurfaces, 1 1 /4
L-shape curvilinear
Morrison
description type w d h pattern no. lam. V1 V2
24D returns left and right 3 grommets 42 42 1 1 /4 MU1-C4242SS( ) $855. $1,100. $1,542.
48 48 1 1 /4 MU1-C4848SS( ) 932. 1,201. 1,678.
48 60 1 1 /4 MU1-C4860SS( ) 1,060. 1,362. 1,908.
48 72 1 1 /4 MU1-C4872SS( ) 1,216. 1,566. 2,197.
60 48 1 1 /4 MU1-C6048SS( ) 1,060. 1,362. 1,908.
72 48 1 1 /4 MU1-C7248SS( ) 1,216. 1,566. 2,197.
24D return left, 30D right 3 grommets 48 48 1 1 /4 MU1-C4848SD( ) 932. 1,201. 1,678.
48 60 1 1 /4 MU1-C4860SD( ) 1,060. 1,362. 1,908.
48 72 1 1 /4 MU1-C4872SD( ) 1,216. 1,566. 2,197.
60 48 1 1 /4 MU1-C6048SD( ) 1,060. 1,362. 1,908.
72 48 1 1 /4 MU1-C7248SD( ) 1,216. 1,566. 2,197.
30D return left, 24D right 3 grommets 48 48 1 1 /4 MU1-C4848DS( ) 932. 1,201. 1,678.
48 60 1 1 /4 MU1-C4860DS( ) 1,060. 1,362. 1,908.
48 72 1 1 /4 MU1-C4872DS( ) 1,216. 1,566. 2,197.
60 48 1 1 /4 MU1-C6048DS( ) 1,060. 1,362. 1,908.
72 48 1 1 /4 MU1-C7248DS( ) 1,216. 1,566. 2,197.
30D returns left and right 3 grommets 48 48 1 1 /4 MU1-C4848DD( ) 932. 1,201. 1,678.
Worksurface Planning
Order Code
Example: MU1-C4860SD-117
MU1 Worksurface, 1 1 /4
C L-shape curvilinear
48 Width left
60 Width right
S Depth of left return
D Depth of right return
117 Surface finish
Specification Information
Width dimension (W) refers to width
of left-side back edge; depth
dimension (D) indicates width of
right-side back edge.
S- 24D side edge
D- 30D side edge
Specify surface finish.
1 1 /4curvilinear surfaces are solid
core construction with threaded
metal inserts at desk support and all
bracket locations.
MU1- worksurfaces are supported
by brackets with machine screws.
All worksurfaces are U.L.-listed.
All L-shape curvilinear
worksurfaces have three grommets.
Corner worksurfaces with equal rear
edges have diagonal grain direction.
121
L-shape worksurfaces have grain
direction along the longer back
edge.
Application Notes
L-shape curvilinear worksurfaces
may be used interchangeably in
desk and panel system applications.
They may be supported by corner
desk supports or by VDT end
support bracket kit. Use cantilever
bridging brackets or flat brackets to
join to adjacent worksurfaces.
L-shape surfaces may also be
supported by MN1- end panel in
conjunction with desk support, or
cantilever bracket in panel
planning.
L-shape surfaces are veneer or
post-formed plastic laminate on
both back edges, matching profile
T-mold on curvilinear front, and
self-edge on sides.
Curvilinear worksurfaces are
available only in 1 1 /4 thickness.
L-shape surfaces are 3 /8 less than
nominal depth for rear wire
clearance or privacy screens.
If specifying privacy screens on
both back edges, one or both must
be 48 back-of-VDT type.