download - Knoll
download - Knoll
download - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Worksurfaces, 1 1 /4<br />
rounded end worksurfaces<br />
Morrison<br />
description w d h pattern no. paint lam. V1 V2<br />
30D rounded end - End grommets 62 5 /8 30 1 1 /4 MU1-R6330E( ) $1,074. $1,494. $2,201.<br />
74 5 /8 30 1 1 /4 MU1-R7530E( ) 1,109. 1,544. 2,250.<br />
30D rounded end - Recessed grommets 62 5 /8 30 1 1 /4 MU1-R6330R( )(L/R) 1,074. 1,494. 2,201.<br />
74 5 /8 30 1 1 /4 MU1-R7530R( )(L/R) 1,109. 1,544. 2,250.<br />
30D rounded end - No grommets 62 5 /8 30 1 1 /4 MU1-R6330B( )(L/R) 1,003. 1,422. 2,129.<br />
74 5 /8 30 1 1 /4 MU1-R7530B( )(L/R) 1,036. 1,470. 2,175.<br />
Support column 5 – 27 MM2-L26( ) 170.<br />
Order Code<br />
Example: MU1-R6330E-117<br />
MU1 Worksurface, 1 1 /4 thick<br />
R Rounded end<br />
63 Width<br />
30 Depth<br />
E End grommets<br />
117 Surface finish<br />
Specification Information<br />
Grommets/no grommets:<br />
E- rounded end worksurface<br />
includes 3 grommet in<br />
each straight end corner.<br />
R- rounded end worksurface<br />
includes 3 grommets<br />
recessed for use with 6<br />
recessed desk support.<br />
B- rounded end worksurface<br />
does not include grommets<br />
Specify surface finish.<br />
Rounded end worksurfaces with<br />
recessed or no grommets are<br />
specified left or right to determine<br />
position of grommets and pedestal<br />
drilling. Rounded end when seated<br />
at desk defines L/R hand (Right<br />
hand shown above).<br />
1 1 /4 worksurfaces are 3-ply, solid<br />
core construction with threaded<br />
metal inserts at all end panel, desk<br />
support and bracket locations and<br />
pilot holes at pedestal locations.<br />
MU1- worksurfaces are supported<br />
by brackets with machine screws.<br />
All worksurfaces are U.L.-listed.<br />
118<br />
End grommeted tops have inserts to<br />
accept desk support at straight end<br />
and no pedestal inserts.Plastic<br />
laminate worksurfaces have<br />
radiused T mold edge and a flat<br />
self-edge in the straight edge.<br />
Application Notes<br />
Rounded end worksurfaces are used<br />
interchangeably in desk and panel<br />
system applications as main<br />
surfaces or extensions. They may be<br />
supported by 30 end support<br />
brackets, 30 cantilever bracket,<br />
30 flat bracket or 30 conference<br />
end panel, and by a support column<br />
at the rounded end.<br />
Use 18D pedestal or end panel with<br />
desk support under rounded end<br />
worksurfaces with recessed<br />
grommets. Use 48D desk support<br />
with 63 rounded end and 60W<br />
desk support with 75 rounded end.<br />
Worksurfaces with end grommets<br />
may not be supported by conference<br />
end panel.<br />
Suspended pedestals may not be<br />
used with 1 1 /4 worksurfaces.<br />
Rounded end worksurfaces have<br />
threaded metal inserts for desk<br />
support, end panel each end, and at<br />
all bracket locations. End grommet<br />
worksurfaces have no pedestal<br />
inserts.