download - Knoll

Slatwall Tiles
Specifications
Dividends Horizon
Slatwall Tiles
Slatwall tiles are designed to support KnollExtra
Orchestra work tools. Slatwall tiles will support
flat panel monitor arms with varying weight
limitations based on mounting and application.
Please refer to the KnollExtra price list for
comprehensive mounting and weight limitation
information by application. Slatwall kits include
all mounting brackets and hardware for
installation, and are fully assembled. SLATWALL
TILES INCLUDE INTEGRAL TILE SUPPORT(S).
Slatwall tiles are field installed on Dividends
Horizon DP7 panel frames. To specify, select the
slatwall width to match the width of the panel
frame, in either top or middle position locations.
Specify slatwall tiles along with built-to-spec
panel frames and other tiles for a complete
panel. Slatwall tiles may not be specified directly
above or below other slatwall tiles, beltway,
stack frames, or stacking screens. Slatwall
tiles may not be specified on stack frames
Construction
Slatwall is constructed of heat treated extruded
aluminum, powder coated in any Knoll Core
paint color. 16 gauge steel reinforcements with
integral hooks and tri-lobular screws on the back
of slatwall provide reinforcement for heavy loads.
Note: Due to design improvements with the
slatwall tile, monitor arm reinforcements are
no longer required when hanging monitor
arms from Dividends Horizon slatwall.
Top Position Slatwall Tiles
Top position slatwall tiles may be installed
at the top of any Dividends Horizon DP7
panel frame, and include all required
hardware. Top position slatwall is available
in heights of 7, 14, 21 and 28 inches.
TOP POSITION SLATWALL TILES FEATURE
AN INTEGRAL TILE SUPPORT AT THE
BOTTOM, REPLACING THE SEPARATE
D1 OR D2 TILE SUPPORT TYPICALLY
REQUIRED BETWEEN TILES.
Middle Position Slatwall Tiles
Middle position slatwall tiles may be installed
at the middle of any Dividends Horizon
DP7 panel frame, and include all necessary
hardware. Middle position slatwall is available
in heights of 7, 14 and 21 inches.
MIDDLE POSITION SLATWALL TILES
FEATURE AN INTEGRAL TILE SUPPORT
AT THE TOP AND BOTTOM, REPLACING
D1 OR D2 TILE SUPPORT TYPICALLY
REQUIRED BETWEEN TILES.
Top Position Slatwall
Middle Position Slatwall
94