download - Knoll

Preconfigured Desks
Freestanding Corner Unit
Specifications
Dividends Horizon
Freestanding Corner Units (Assembly)
Dividends freestanding corner units are
available ‘‘Preconfigured’’ and can also be
specified by component for ‘‘Build-to-Spec’’
applications. ‘‘Preconfigured’’ freestanding
corners consist of a worksurface, three ‘‘L’’
Available Sizes
1 2
Construction
Corner Unit Specifications
1
board core with high pressure laminate
surface and 2mm vinyl edge banding
Rear Corner End Unit
3
1 1 2
Side Corner End Unit
3
Freestanding Corner End Units (Components)
brackets that allow attachment to corner
unit is used in the rear corner to support the
side corner end unit is attached to both
sides of a corner worksurface for support.
Optional Edge Grommets
Edge grommets are optional and can be
specified factory-installed on center on both
edges along the rear edge of the worksurface.
Grommets can also be ordered as a kit (pattern
number D1WSG) for field installation in any
position along the rear edge of the worksurface.
Freestanding Corner Unit Components
Edge Grommet Locations
Edge
Grommet
Back Panel
End
Unit
Rear Corner
End Unit
Freestanding Corner Unit attached to returns
to form an “L” shaped workstation
358