download - Knoll

Corner Worksurfaces
Curvilinear Corner ‘‘L’’ shape-Mixed Depths
Specifications
Dividends Horizon
Curvilinear Corner ‘‘L’’ Shape Worksurfaces
Dividends Horizon curvilinear corner, "L"
shape worksurfaces are specified for
panel-hung applications only and provide a
continuous flow when used in conjunction
with other curvilinear worksurfaces.
Curvilinear Corner Worksurface Support
Curvilinear corner ‘‘L’’ shape worksurfaces
must be supported by cantilevers at each end
and a panel-to-worksurface bracket at the
rear corner. Panel-mounted C-leg or open leg
worksurface supports may be used instead of
cantilevers for corner worksurface support.
Cantilevers and panel-mounted C-leg or
open leg supports are ordered separately. A
panel-to-worksurface bracket is included.
Note: 60" and 72" wide curvilinear corners
support along the 60" or 72" side.
Note: A pedestal or panel-mounted
C-leg can be substituted for a cantilever
in the following locations:
curvilinear "L" shape corner worksurfaces
Curvilinear Corner Worksurface
Applications
Curvilinear ‘‘L’’ shape corner worksurfaces
are primarily used with wave end and
rectangular worksurface returns.
Curvilinear Corner Worksurface
Curvilinear Corner Worksurface
Support Options
Curvilinear Corner Worksurface
Applications
3' 3'
3'
3'
Curvilinear Corner “L”
Shape Worksurface
4'
2'
4'
**
2'
** Requires a return panel or
pedestal/panel-mounted C-leg or
Open Leg Support with panel-toworksurface
bracket for support
308