download - Knoll
download - Knoll
download - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Credenzas<br />
Single Depth - Specifications<br />
Dividends Horizon<br />
Single Depth Credenzas<br />
Dividends Horizon single depth credenzas<br />
increase planning and design options by<br />
blending residential furniture attributes within<br />
systems furniture applications. Credenzas<br />
offer a practical solution for functional under<br />
worksurface storage, while increasing<br />
the overall aesthetics of an office.<br />
Credenzas consist of a metal, laminate, or<br />
veneer top option with a shelf and binder<br />
storage area. Single depth credenzas have four<br />
configuration options: sliding door only, drawer<br />
only, sliding door and drawer combination, and<br />
open shelves without a sliding door or a drawer.<br />
The sliding door is a single steel, laminate,<br />
or veneer door with a handle that conceals<br />
half the width of the binder storage area. A<br />
single drawer may be specified for the location<br />
above the shelf. The drawer may be installed<br />
in either the right or left location, the drawer<br />
location does not need to be specified when<br />
ordered. When a drawer is specified along<br />
with a sliding door, the drawer front and sliding<br />
door finishes are the same. Units that include<br />
a drawer have a full back and those without<br />
a drawer have a partial back that encloses<br />
the binder storage area below the shelf.<br />
Shorter width credenzas, 24, 30, and 36<br />
inches wide, are available with a laminate<br />
or veneer top only. 24 inch wide credenzas<br />
do not include a center vertical septum<br />
and are only available as open shelf units,<br />
without a sliding door or drawer. Units are<br />
shipped knocked down and may be specified<br />
with or without locks. Dividends Horizon<br />
credenzas are available in all <strong>Knoll</strong> Core<br />
finishes. Legacy finishes are not available.<br />
Available Sizes<br />
Heights: 24 inches<br />
Depth: 13-5/16 inches<br />
Widths: 24 – 72 inches<br />
Construction<br />
Top:<br />
- Steel: 16-gauge painted steel<br />
- Laminate: 1-1/4 inch thick particle<br />
board with high pressure laminate<br />
on top and a paper backer on the<br />
underside with 2mm edgeband<br />
- Veneer: 1-1/4 inch thick particle board<br />
with 0.6mm veneer on top and edge.<br />
End Panels: 16-gauge painted steel<br />
Back Panel: 20-gauge painted steel<br />
Door:<br />
- Steel: 20-gauge panted steel<br />
- Laminate: 3/4 inch thick particle<br />
board with high pressure laminate on<br />
the outside and a paper backer on<br />
the inside with 1mm edgeband<br />
- Veneer 3/4 inch thick particle board with<br />
0.6mm thick veneer on top and edge<br />
Fixed Shelf: 16-gauge painted steel<br />
Door Handle: painted aluminum<br />
(same color as case)<br />
Interior Dimensions<br />
Heights: 12-1/2 inches for the lower section,<br />
5-7/8 inches for the upper section<br />
Depth: 12-1/16 inches<br />
Locks<br />
Locks are standard on credenzas with doors<br />
and/or drawers and are keyed randomly<br />
unless otherwise specified. All locks are factory<br />
installed and have a black finish. Credenzas<br />
can also be specified without locks if required.<br />
Single Depth Credenza<br />
with Open Shelves<br />
Single Depth Credenza<br />
with a Drawer<br />
Single Depth Credenza<br />
with a Sliding Door<br />
Single Depth Credenza<br />
with a Drawer and a<br />
Sliding Door<br />
244
Change language