download - Knoll

Pedestals
Series 2 Floorstanding, Doublewide and Mobile
Specifications
Dividends Horizon
Series 2 Floorstanding Pedestals
Series 2 floorstanding pedestals are used to
support worksurfaces in both panel wrapped
and freestanding applications. No cantilevers
or other supports are required at the end of
the worksurface supported by a pedestal.
Two drawer configurations are available:
box/box/file and file/ file. Mobile pedestals
are not available without locks.
The Series 2 24" deep pedestal design offers
case without a back. In panel applications or
in freestanding desking applications where the
desk is against the wall, a back is not necessary.
In desking applications where the back of
the case is exposed, an optional back is
used to conceal the pedestals contents.
The 18" and 30" deep Series 2 pedestals
include a back with each case.
Mobile Pedestals
Series 2 mobile pedestals provide
moveable storage within a workstation
and tuck beneath worksurfaces when not
in use. Available drawer configurations
are box/file, box/box/file and file/file.
Mobile pedestals roll on four cornermounted
swivel casters and one bottom
drawer-mounted caster for stability when
the lower drawer is in the open position.
The front corner casters are locking.
Mobile pedestals may be specified with an
optional handle allowing easy mobility.
All mobile pedestals include 13-gauge
finished tops. A back is included with
all Series 2 mobile pedestals.
Pedestals may be specified without the
top for attachment of a pedestal cushion.
Pedestal cushion may be ordered through
the Knoll Currents product line.
Available Sizes
Depths: 18", 24" and 30" (Floorstanding
pedestal only)
Width: 15"
Height: 26 7 / 8"
Series 2 Doublewide Pedestals
The doublewide pedestal incorporates two
12" high drawers in a 30" or 36" width
(18 3 / 4" depth) and is intended for below
worksurface applications only. The doublewide’s
design allows for side-to-side letter or
legal filing and front-to-back letter filing.
Doublewide pedestals can be used below
19", 24", 30" or 36" deep worksurfaces,
not 18" deep worksurfaces.
Available Sizes
Depth: 18 3 / 4" (floorstanding pedestal only)
Width: 30" and 36"
Height: 26 7 / 8"
Construction:
• Outer wrapper: 20-gauge steel
• Drawer front: 20-gauge steel (double wide
front: 18-gauge)
• Pedestal back: 20-gauge
• 3 / 4 extension ball bearing slides on 6"
box drawers
• Full extension ball bearing slides on
12" file drawers
• Leveling glides: 3 / 8" diameter steel stem
with 1 1 / 2"of height adjustment (double
wide ped: 5 / 16" diameter steel stem
with a 1 9 / 16" of height adjustment
Internal Drawer Dimensions (DS2, 24"d)
Box drawer
• Internal height: 4 5 / 16"
• Internal width: 12 1 / 16"
• Internal depths: 18 3 / 8"
File drawer
• Internal height: 9 1 / 4"
• Internal width: 12 1 / 8"
• Internal depths: 18 3 / 8"
File drawer (doublewide pedestal)
• Internal height: 9 3 / 4"
• Internal width: 26 3 / 4" and 32 3 / 4"
• Internal depth: 15 3 / 4"
Locks
Series 2 mobile pedestals are available not
available without locks. Series 2 doublewide
pedestals can be ordered with or without locks.
Locks are randomly keyed unless
otherwise specified. Other keying options
include keyed alike or keyed with lock
cores K001-K250. All locks are factoryinstalled
and have a black finish.
Pedestal Accessories
All Series 2 freestanding pedestal accessories
including the hanging file bar must be
specified separately. Series 2 double wide
pedestals are shipped with hanging file bars.
Interior drawer dimensions for DS2 are 18"
deep and 30" deep. Pedestals are the same
as DS1 dimensions listed on page 228.
Mobile Pedestal
238