Calibre Lateral Files - Knoll

Calibre accessories
Calibre
description h w pattern no. list price P1 P2 P3
Label holder, (package of 10) 5ZNNL $36.
Front-to-back hanging rails (2) 5ZNNF 38.
Hanging rail (1) 30 5Z4NB 14.
36 5Z6NB 14.
42 5Z8NB 14.
Ganging hardware kit 5Z4NN n/c
Media bar (T-bar) for hanging tape reels/EDP
binders
30 5Z4NG 98.
36 5Z6NG 98.
42 5Z8NG 98.
Dividers (package of 3) 5ZNNE 20.
Application Notes
Label Holders
Label holders are designed for
standard Calibre fronts, and are not
compatible with Morrison fronts.
Labels are included.
Hanging Rails
Hanging rails for front-to-back and
side-to-side are provided standard.
Order two hanging rails and
front-to-back hanging rails as
needed to convert a component.
64
Ganging Hardware Kit
Multiple freestanding files or
cabinets should be ganged for
security. Hardware and instructions
are supplied with each file or
cabinet.
Media Bar (T-Bar)
Will accommodate most retail brand
tape reels and/or Wrightline type
EDP printout hanging devices. For
use only in 15 fixed shelf
components. Media Bars are painted
in Black.
Counterweight Kit
Single freestanding files (two and
three-high) should be weighted with
a counterweight. Specify according
to case width.
Lateral file top intended for use with
Calibre front files only.
Adjustable Dividers
Adjustable dividers are sized for use
in 10.5,12, 13.5 and 15
components and cannot be used in
3,6, 7.5 or 9components.
Order dividers with attachment
back when converting a component.
Divider assemblies are painted in
Black. Hanging rails are painted in
Black.
Adjustable Shelves
Adjustable shelves are painted in
Black standard. If Calibre standard
P1, P2 or P3 paints are required add
a ‘‘P’’ suffix to the pattern number
and select the appropriate paint
grade. Example 5ZAC2ASP
Note: File tops are designed for
use with Calibre Lateral Files