Calibre Lateral Files - Knoll

Calibre Front Lateral Files- Built-to-Spec
Calibre Built-to-Spec Interior Components
Calibre
description width pattern no. P1 P2 P3
15 Rollout drawer with rails 30 A $278. $306. $323.
36 A 306. 336. 355.
42 A 319. 351. 368.
13.5 Rollout drawer with rails 30 B 261. 286. 302.
36 B 290. 322. 336.
42 B 316. 347. 365.
Calibre File Collection
12 Rollout drawer with rails 30 C 162. 179. 188.
36 C 185. 204. 213.
42 C 194. 214. 225.
10.5 Rollout drawer with rails 30 D 162. 179. 188.
36 D 185. 204. 213.
42 D 194. 214. 225.
9 Rollout drawer 30 F 212. 233. 244.
36 F 232. 255. 268.
42 F 242. 267. 279.
7.5 Rollout drawer 30 G 212. 233. 244.
36 G 232. 255. 268.
42 G 242. 267. 279.
6 Rollout drawer 30 H 177. 194. 204.
36 H 196. 216. 227.
42 H 216. 239. 250.
Special Planning Notes for ‘‘Built
to Spec’’ Files
Specification Information
Application Notes
1). Posting shelves nor tie-bars are
not permitted directly below
cupboard doors 2). Tie-bars and
posting shelves are not permitted
within the upmost top location or the
bottom location of a lateral file case
3). Calibre files are painted with a
monochromatic color scheme. If
seeking case and drawer fronts to be
a different color on the same case,
this is considered a special 4).
Receding doors with fixed and
pullout shelves are not permitted
directly below cupboard doors 5).
Cases are limited to either one
tie-bar or one posting shelf per case
6). Individual locking drawers are
not available as a ‘‘Built to Spec’’
option 7). Only 63 and 64.5 ‘‘Built
to Spec’’ Hybrid are permitted
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paint
finishes available at P1 pricing.
This excludes metallic paints and
white paints. (see color policy page
14).
All 10.5,12, 13.5 and 15
drawers accommodate side-to-side
filing and front-to-back filing.
File bars can be used in 10.5,12,
13.5 and 15 drawers having
side-to-side rails.
No more than four 3 drawers can be
specified in any one-file case.
Posting shelves are most affective
when positioned from
desk-to-counter height or 27 to 39
from the floor.
Posting shelves and tie bars cannot
be placed within the top 1.5 of a
file. Tie bars cannot be placed
directly below a posting shelf.
Interior modules must equal the
overall case height less 3.
Posting shelves are not available
below desk height.
Largest drawers are best positioned
near the base of the file.
All drawers and shelves have a
150-pound load limit.
Fixed shelves are not adjustable.
Dividers and other accessories must
be ordered separately.
Label holders are not included with
files. Please see Accessories page
64.
59