Calibre Lateral Files - Knoll
Calibre Lateral Files - Knoll
Calibre Lateral Files - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Planning Built-to-Spec <strong>Calibre</strong> <strong>Lateral</strong> <strong>Files</strong><br />
<strong>Calibre</strong><br />
Planning Built-to-Spec <strong>Files</strong><br />
<strong>Calibre</strong> built-to-spec files allow<br />
thousands of drawer, shelf and door<br />
configurations using a variety of 1.5,<br />
3,6, 7.5, 10.5,12, 13.5 and 15<br />
high components.<br />
When compiling a product number<br />
for built-to-spec files, specify<br />
individual components from the top<br />
of the case to the bottom. A letter<br />
designation has been assigned to<br />
each component.<br />
Use the sample worksheet at right or<br />
the worksheet from the price list.<br />
The total height of components must<br />
equal the interior height of the file<br />
case. Example: A 51 high case must<br />
contain components that equal 48<br />
exactly.<br />
When specing files:<br />
• No more than four 3 drawers can<br />
be used in a single case<br />
• Posting shelves must be specified<br />
at a height of between 27 to 39<br />
• The largest drawers are best<br />
positioned near the base of the file<br />
• Hybrid doors can only be specifics<br />
at the top of the case<br />
All drawers and shelves have a 150<br />
lb. load limit.<br />
<strong>Calibre</strong> File Collection<br />
57