Calibre Lateral Files - Knoll
Calibre Lateral Files - Knoll
Calibre Lateral Files - Knoll
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Calibre</strong> desk<br />
1 1 /4 worksurfaces<br />
30 deep<br />
<strong>Calibre</strong><br />
description type w d h pattern no. laminate<br />
Straight worksurface, with grommets 30 30 1 1 /4 CW1-S3030-A $273.<br />
36 30 1 1 /4 CW1-S3630-A 285.<br />
42 30 1 1 /4 CW1-S4230-A 311.<br />
48 30 1 1 /4 CW1-S4830-A 336.<br />
60 30 1 1 /4 CW1-S6030-A 390.<br />
66 30 1 1 /4 CW1-S6630-A 416.<br />
72 30 1 1 /4 CW1-S7230-A 442.<br />
Straight worksurface, no grommets 30 30 1 1 /4 CW1-S3030-B 254.<br />
36 30 1 1 /4 CW1-S3630-B 267.<br />
42 30 1 1 /4 CW1-S4230-B 294.<br />
48 30 1 1 /4 CW1-S4830-B 319.<br />
60 30 1 1 /4 CW1-S6030-B 369.<br />
66 30 1 1 /4 CW1-S6630-B 396.<br />
72 30 1 1 /4 CW1-S7230-B 423.<br />
Worksurface reinforcements For use with a 60 worksurface CRB60 31.<br />
For use with a 66 worksurface CRB66 38.<br />
For use with a 72 worksurface CRB72 45.<br />
Order Code<br />
Example: CW1-S3630-B G<br />
C <strong>Calibre</strong><br />
W1 <strong>Calibre</strong> worksurface<br />
1 1 /4 thick<br />
S Straight<br />
36 36 wide<br />
30 30 deep<br />
B No grommet<br />
G Laminate - medium grey<br />
Specification Information<br />
To order, specify:<br />
1. Pattern number<br />
2. Laminate finish<br />
See page 16 for <strong>Calibre</strong> desk<br />
finishes.<br />
Grommets/no grommets:<br />
A worksurface include<br />
grommets<br />
B worksurface does not include<br />
grommets<br />
169<br />
Application Notes<br />
30D worksurfaces can be used as<br />
main worksurfaces, returns, bridge<br />
units, or credenza tops. They can be<br />
supported by end units, pedestals,<br />
or flat brackets.<br />
Grommet:<br />
Center rear grommet is standard on<br />
all preconfigured units. Finish is<br />
black, and includes cover.<br />
Construction:<br />
Worksurfaces are 1 1 /4 thick, 3-ply<br />
solid construction, and are<br />
predrilled at all pedestal, end unit,<br />
and bracket locations.<br />
Worksurface reinforcements are<br />
required when two end units are<br />
used to support a 60,66,or72<br />
worksurface.<br />
<strong>Calibre</strong> Desk