Calibre Lateral Files - Knoll
Calibre Lateral Files - Knoll
Calibre Lateral Files - Knoll
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Calibre</strong> desk<br />
1 1 /4 worksurfaces<br />
18 deep<br />
<strong>Calibre</strong><br />
description type w d h pattern no. laminate<br />
Straight worksurface, with grommets 30 18 1 1 /4 CW1-S3018-A $210.<br />
36 18 1 1 /4 CW1-S3618-A 224.<br />
42 18 1 1 /4 CW1-S4218-A 248.<br />
48 18 1 1 /4 CW1-S4818-A 275.<br />
60 18 1 1 /4 CW1-S6018-A 327.<br />
66 18 1 1 /4 CW1-S6618-A 354.<br />
72 18 1 1 /4 CW1-S7218-A 379.<br />
Straight worksurface, no grommets 30 18 1 1 /4 CW1-S3018-B 191.<br />
36 18 1 1 /4 CW1-S3618-B 204.<br />
42 18 1 1 /4 CW1-S4218-B 231.<br />
48 18 1 1 /4 CW1-S4818-B 256.<br />
60 18 1 1 /4 CW1-S6018-B 307.<br />
66 18 1 1 /4 CW1-S6618-B 333.<br />
72 18 1 1 /4 CW1-S7218-B 360.<br />
Worksurface reinforcements For use with a 60 worksurface CRB60 31.<br />
For use with a 66 worksurface CRB66 38.<br />
For use with a 72 worksurface CRB72 45.<br />
Order Code<br />
Example: CW1-S3618-B G<br />
C <strong>Calibre</strong><br />
W1 <strong>Calibre</strong> worksurface<br />
1 1 /4 thick<br />
S Straight<br />
36 36 wide<br />
18 18 deep<br />
B No grommet<br />
G Laminate - medium grey<br />
Specification Information<br />
To order, specify:<br />
1. Pattern number<br />
2. Laminate finish<br />
See page 16 for <strong>Calibre</strong> desk<br />
finishes.<br />
Grommets/no grommets:<br />
A worksurface include<br />
grommets<br />
B worksurface does not include<br />
grommets<br />
167<br />
Application Notes<br />
18D worksurfaces can be used as<br />
main worksurfaces, returns, bridge<br />
units, or credenza tops. They can be<br />
supported by end units, pedestals,<br />
or flat brackets.<br />
Grommet:<br />
Center rear grommet is standard on<br />
all preconfigured units. Finish is<br />
black, and includes cover.<br />
Construction:<br />
Worksurfaces are 1 1 /4 thick, 3-ply<br />
solid construction, and are<br />
predrilled at all pedestal, end unit,<br />
and bracket locations.<br />
Worksurface reinforcements are<br />
required when two end units are<br />
used to support a 60,66,or72<br />
worksurface.<br />
<strong>Calibre</strong> Desk