Calibre Lateral Files - Knoll

Calibre desk
VDT corners, rounded end worksurfaces and brackets
Calibre
description w d h pattern no. P1 P2 P3
VDT corner unit 36 24 28 1 /2 CV1-3624 $1,018. $1,069. $1,123.
42 24 28 1 /2 CV1-4224 1,095. 1,151. 1,208.
48 24 28 1 /2 CV1-4824 1,189. 1,247. 1,309.
Rounded end worksurface 62 5 /8 30 1 1 /4 CW1-R6330B 744.
74 5 /8 30 1 1 /4 CW1-R7530B 765.
Support column 5 – 27 CB1-L26 148.
T-shaped end unit 9 30 27 1 /4 CDE1-T30 262. 275. 288.
Desk integration bracket 15 1 1 /2 27 1 /4 CB1-I18 145. 152. 160.
15 1 1 /2 27 1 /4 CB1-I24 157. 165. 173.
15 1 1 /2 27 1 /4 CB1-I30 164. 172. 180.
Order Code
Specification Information
Application Notes
Example: CV1-3624-117 F
C Calibre
V1 VDT corner unit
36 36 width
24 24 depth
117 Soft grey paint
F Pumice laminate
VDT corner unit:
To order, specify:
1. Pattern number
2. Paint finish
3. Laminate finish
Rounded end worksurface:
To order, specify:
1. Pattern number
2. Laminate finish
T-shaped end unit and desk
integration bracket:
To order, specify:
1. Pattern number
2. Paint color
See page 16 for Calibre desk
finishes.
VDT corner units:
Freestanding VDT corner units
must have returns attached to both
sides.
Rounded end worksurfaces:
Calibre rounded end worksurfaces
can be supported by a support
column and T-shape end units or
made into a desk with Calibre
pedestals, end units and filler
panels. Specify support components
separately.
Rounded end tops with woodgrain
laminate have a black 10mm T-mold
edge.
Support column:
Used to support end of rounded end
worksurface.Available in black only.
Desk integration bracket:
Can be used in place of a Calibre
end unit when end of desk is
modular with Morrison panel.
Maintains filler panel modularity
while supporting desk end and
allowing access to duplex
receptacles in panel raceway.
Calibre Desk
163