Calibre Lateral Files - Knoll

Calibre Tower Accessories
Calibre
description type w d h pattern no. list P1 P2 P3
Pedestal Drawer Divider Kit (For use in Calibre
tower or Calibre pedestal box and file drawers.
Not intended for 3 drawers.)
DT3PDD $329.
File Drawer Divider Kit (For use with all
Calibre/S2/Morrison front lateral file drawers
with the exception of 3 high drawers)
DT3FDD 410.
File Drawer Divider Kit for 3 high lateral file
drawers
DT3SDD 410.
Pencil Tray (Calibre/Dividends/S2 pedestals and
towers)
DS1PPT 32.
Specification Information
DT3PDD Pedestal Drawer Dividers
and DT3RTPedestal Drawer
Reference Tablets are supported
with a black painted finish
standard. Select from 6 additional
accent colors at no-charge. Accent
colors are as follows: (Mey) Memo
Yellow, (MRG) Marine Grey, (SFG)
Seafoam Green, (REG) Robbins Egg
Blue, (SSP) Sunset Pink and (KRD)
Knoll Red.
Application Notes
Note: Only the DT3PDD, DT3FDD,
DT3RT and DT3SDDdividers and
Reference Tablets are available in
accent colors, with the exception of
tower marker boards which are
supported in all accent colors with
the exception of (KRD) Knoll Red.
The DT3PDD Pedestal Drawer
Divider Kit is comprised of a series
of magnetic fences that attach to the
bottom of steel pedestal (Calibre
and S2) pedestal drawer bodies to
support space division. May also be
used within S2 and Calibre Tower
File and Box drawers. Each kit
contains (4) 3 wide, (3) 6 wide, (2)
9 wide and (2) 12 wide dividers.
Dividers are constructed from steel.
DT3PDD dividers are not designed
to work with 3 high lateral file or
pedestal drawers.
The DT3FDD File Drawer Divider
Kit is comprised of a series of
magnetic fences that attach to the
bottom of (Calibre/S2/Morrison
Font) lateral file drawer bodies to
support space division. Each kit
contains (4) 3 wide, (3) 6 wide, (2)
9 wide, (2) 12 and (2) 15 dividers.
Dividers are constructed from steel.
DT3FDD dividers are not designed
to work with 3 high lateral file or
pedestal drawers.
The DT3SDD File Drawer Divider
Kit is comprised of a series of
magnetic fences that attach to the
bottom of (Calibre/S2/Morrison
Font) lateral file drawer bodies to
support space division. Each kit
contains (4) 3 wide, (3) 6 wide, (2)
9 wide, (2) 12 and (2) 15 dividers.
Dividers are constructed from steel.
DT3SDD dividers are are designed
to work with 3 high lateral file or
pedestal drawers.
Marker boards are intended for use
within standard single door or
wardobe towers with a cupboard
door. Marker boards attach to the
interior of cupboard doors. To
determine the correct size marker
board, first determine the drawer
configuration of either a single door
or wardrobe tower with a cupboard.
Then match the configuration of
drawers to the correct marker board
description. (example) If you have a
50 high single door tower with (1)
wide drawer, then you will specifiy a
MB50W. Marker boards are finished
in White, Seafoam Green, Marine
Grey, Memo Yellow, Robbins Egg
Blue or Sunset Pink.
Note: Worksurface Splice Plate Kits
are intended for use with Side
Access Bookcase and Display
Towers only.
Note: 15 wide half depth shelves
are suitable for use with 15 wide
single door towers or within the
wardobe portion of a 30 wide
wardrobe tower.
Note:24 wide half depth shelves
are suitable for use with 24 wide
single door towers or 24 wide
double door towers. 30 wide half
depth shelves are suitable for use in
with 30 wide double door towers
only.
Calibre Front Storage Towers
143