Calibre Lateral Files - Knoll

Ordering the Calibre Desk
Calibre
Construction and Shipping
Information
Worksurfaces
All Calibre worksurfaces are 1 1 /4
thick, three ply solid construction,
and are predrilled at all pedestal,
end unit, and bracket locations.
Front and rear have a 3 /8 double
post-formed edge; ends are
self-edge. Calibre desk
worksurfaces are nominally
dimensioned and therefore not
compatible with Calibre file sizes.
See page 64 for Calibre file
worksurfaces tops.
End Units
Calibre End Units have a unique
‘‘L’’ design, allowing for
interchangeable planning between
pedestals and end units. The visitor
side of the End Unit is the same
width as a pedestal. This design
allows for the same width of filler
panel to be used with both single
and double pedestal desks.
End Units are of steel construction.
End Units are non-handed.
Filler Panels
Filler panels install between end
units, pedestals, or both.
When installed, a 3 /8 wire
management slot is created between
the top of filler panel and the
bottom of the worksurface. This slot
allows for wires to be moved to
multiple locations without need for
more than one grommet.
Grommets
All 18, 24 &30 deep
worksurfaces specified with
grommet feature with one center
grommet on the visitor side of the
worksurface. Together with the filler
panel, plugs can be placed through
the grommet, and wires moved to
the desired location.
36 deep worksurfaces specified
with grommet feature two 3 round
grommets, positioned
inside of filler panel and pedestal
locations.
Locks
KnollKey lock program instructions
as listed on 181.
Note:
Equity ‘‘H’’ series cores and keys
are not available on Calibre Desk
product.
Overdesk Units
Calibre Overdesk Units include two
Stanchions, and one Overhead unit.
Tackable privacy screens
are ordered separately. Locks are
available. Calibre Overdesks attach
directly to the top of any
worksurface.
Vertical slots allow mounting of
Orchestra Load Bars to stanchions.
A vertical wire manager for task
light cords is integral to the design.
Overdesks are painted steel.
Brackets
All returns and bridge units include
necessary brackets to attach to desk
or credenza units.
Lighting
Task lights can be mounted to
Calibre overdesks equal to or
greater than their own width.
Task lights are available in black
only and include bulbs.
Shipment
All preconfigured units are shipped
in a small number of easily
assembled sub-components;
worksurfaces, pedestals, end units
and filler panels are shipped in
individual protective corrugated
cartons.
Returns, bridges, and overdesk
units require in-field attachment.
Note:
The information in this price list
represents the latest available
information at the time of
publication. Knoll reserves the right
to make changes and improvements
to Calibre products without notice.
13