Knauf Free-Spanning Ceiling D131

Knauf Free-Spanning Ceiling
Material requirements
of selected examples
D131
Material requirement per m² ceiling area without addition for loss and waste.
description
external material = printed italic
unit
(Amounts refer to a ceiling area of 2.5 m x 10 m = 25 m²)
amount as average value
without
fire protection
Knauf Boards
GKB 12.5 mm
spacing of
channels 500 mm
fire protection
solely from below
Knauf Boards GKF 18 mm
spacing of channels 625 mm
fire prot. solely from below + from above
with insulation without insulation
10
connection to wall
UW runner 50x40x0.6; (4.0 m long)
resp.
UW runner 75x40x0.6; (4.0 m long)
resp.
UW runner 100x40x0.6; (4.0 m long)
resp.
UW runner 125x40x0.6; (special)
UW runner 150x40x0.6; (special)
CW profile 50x50x0.6; (up to 5.0 m long)
resp.
CW profile 75x50x0.6; (up to 6.0 m long)
resp.
CW profile 100x50x0.6; (up to 6.0 m long)
resp.
CW profile 125x50x0.6; (special)
resp.
CW profile 150x50x0.6; (special)
fastening of perimeter runner:
resp.
Knauf All Purpose Screw FN 4.3x35
Knauf All Purpose Screw FN 4.3x65
resp.
Knauf Nailable Plug "L" 8/80; (50 pcs. box)
resp.
Knauf Nailable Plug; (100 pcs. box)
connection double profile to perimeter runner
e.g. 2x metal rivets
metal grid
Knauf CW double profile as load bearing channels:
2x CW profile 50x50x0.6; (up to 5.0 m long)
resp.
2x CW profile 75x50x0.6; (up to 6.0 m long)
resp.
2x CW profile 100x50x0.6; (up to 6.0 m long)
resp.
2x CW profile 125x50x0.6; (special)
resp.
2x CW profile 150x50x0.6; (special)
Knauf CW double profile screwed at flange:
Knauf Metal Screw LB 3.5 x 9.5 mm
insulation (consider fire protection; see page 2)
cladding
Knauf Board GKB; 12.5 mm
resp.
Knauf Fire-Resistant Board GKF; 18 mm
cover strip 120 mm wide:
Knauf Solid Board GKF; 25 mm
additional layer:
Knauf Fire-Resistant Board GKF; 12.5 mm
Knauf Drywall Screws; (fastening of cover strips)
TN 3.5 x 35 mm
Knauf Drywall Screws; (fastening of cladding)
TN 3.5 x 25 mm
TN 3.5 x 35 mm
joint filling
Knauf Uniflott; (5 kg/25 kg bag)
(for hand filling)
or
Knauf Jointfiller Super; (20 kg bag)
(for machine filling with Ames Machine)
or
Knauf Fugenfüller Leicht; (5 kg/10 kg/25 kg bag)
(for hand filling with joint tape)
Knauf Joint Tape; (23 m/75 m/150 m roll)
Trenn-Fix 65; (50 m roll)
Edge Trim 23/15; (2.75 m long)
m
m
pcs
pcs
m 3.8
pcs 3.0
m²
m²
m² -
m²
pcs
pcs
kg
kg
kg
m
m
m
0.8 0.8
0.8 0.8
0.2 0.2
0.2
0.2
3.2
as required
1.0
-
-
-
19
-
0.3
0.4
0.3
0.35
1.0
as required
2.6
3.0
- -
- 0.2
0.2
-
3.0 3.0
2.4 2.4 2.4
as required 1.0
as required
-
1.0
- -
- -
1.0
1.0
1.0
10 10
- - -
17
17 17
0.4
0.5
- -
- -
3.1 3.1 3.1 3.1
- -
0.4
0.5
0.4
0.5
0.4 0.4 0.4
0.35
0.35
0.35
1.0
1.0
1.0
as required as required as required