You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User's manual<br />
System Amplifier K&F TOPAS<br />
6.4.5 Power-On Options<br />
Menu: Setup » on/standby<br />
Under this menu item, you define the delay time for power on as well as the operating mode<br />
after connecting to the power supply.<br />
In the setting 'Delay time for switching main supply on', the delay time that the amplifier<br />
waits before switching from standby mode to operating mode is in milliseconds.<br />
If you want to switch on several devices simultaneously using one common switch, you must<br />
not exceed an inrush current of 7A to avoid overloading the mains. With this setting, you<br />
avoid an overload.<br />
With the option 'After AC powerloss', you determine if the amplifier should be in operating<br />
mode after connection to the power supply.<br />
This can be useful when the amplifier once again comes back to life after a power failure and<br />
the device should automatically switch to operating mode.<br />
KLING & FREITAG GMBH © 2012 Revision 3.0 Page 40 of 65
Change language