Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User's manual<br />
System Amplifier K&F TOPAS<br />
6.4.2 Network Settings<br />
Menu: Setup » network<br />
Under this menu item, the web interface shows information about the network.<br />
'Current network status' shows different settings you need for network operation.<br />
In the section 'IP configuration', you determine where the TOPAS gets its IP address from.<br />
• DHCP: A DHCP server assigns an IP address.<br />
• Auto IP: With this function, the device generates and requests an IP address on its own<br />
from the IP range 169.254.1.1 to 169.254.254.255, with the subnet mask 255.255.0.0.<br />
• Static IP: The user assigns a fixed IP address.<br />
Make sure that your network setting of the client (the device with which you access the<br />
amplifier) is the same as the amplifier's settings. If you change and confirm the amplifier's IP<br />
mode, the IP address can change inadvertently, thus blocking your access to the amplifier via<br />
the client. In this case, you have to adjust the client's settings to change the IP address on the<br />
amplifier. (see page 50)<br />
KLING & FREITAG GMBH © 2012 Revision 3.0 Page 37 of 65
Change language