You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User's manual<br />
System Amplifier K&F TOPAS<br />
6.4 Web Interface Setup<br />
Menu: Setup<br />
In this menu, you adjust all important settings on the amplifier.<br />
6.4.1 Software Update<br />
Menu: Setup » updates<br />
Under this menu item, the web interface shows more detailed information about the<br />
firmware.<br />
To update the firmware, a firmware package is required. You can get the package from your<br />
dealer.<br />
The firmware packages are digitally signed. For this amplifier model, you can only install<br />
firmware versions released by <strong>Kling</strong> & <strong>Freitag</strong>.<br />
Please pay attention to the 'Release-Notes' belonging to each update. It may be necessary<br />
to update other components or to adjust the system settings in conjunction with a firmware<br />
update.<br />
Before an update, make sure the device is connected to the power supply and in standby<br />
mode.<br />
KLING & FREITAG GMBH © 2012 Revision 3.0 Page 35 of 65