Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User's manual<br />
System Amplifier K&F TOPAS<br />
Channel 1:<br />
• RMS-Level: Audio signal level<br />
• Limiter: status notification of the peak limiter (PK), RMS limiter (RMS) and current (CUR)<br />
• Clipping: status notification of the analogue input (ADC) and the amplifier module<br />
(AMP)<br />
• Channel 1: toggle between 'On' (open channel) and 'mute' (channel off)<br />
• Input-Routing: Switches between 'Input 1', 'Input 2' and 'Monomix(-6dB)'<br />
• Delay: Input in ms, max. 2000 ms<br />
• invert Phase: invert Phase 'on' or 'off'<br />
• Gain: Enter gain in dB, this value is the volume level of the amplifier itself.<br />
The total gain of the corresponding TOPAS is the sum of 'Group Gain' and 'Gain'.<br />
• Group Gain: Enter gain in dB, this value will be specified by the remote software in the<br />
future.<br />
• Filter: Possibilities to set four free selectable filters, 'Type', 'F[Hz]', 'Q', G[dB] and<br />
activation of this setting<br />
Channel 2 has the same settings as channel 1.<br />
Further information about filters and their functionality, see page 57.<br />
KLING & FREITAG GMBH © 2012 Revision 3.0 Page 32 of 65
Change language