Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
User's manual<br />
System Amplifier K&F TOPAS<br />
4.2.2 Rear<br />
On the rear panel are the following connections:<br />
Position Name Description<br />
A<br />
B<br />
C<br />
D<br />
E<br />
Input, link for<br />
digital audio signals<br />
according to AES/EBU<br />
Terminal connector<br />
for GPI and GPO<br />
Terminal connector<br />
for analogue audio<br />
inputs 1, 2 and<br />
priority input<br />
Analog audio input<br />
for channel 2<br />
Analog audio input<br />
for channel 1<br />
This interface can be optionally activated. Please<br />
contact your dealer to unlock the AES/EBU interface<br />
with a password.<br />
XLR, pin assignment 1=ground, 2=+, 3=-<br />
110 ohms cables are recommended.<br />
Please see chapter 5.4.1.<br />
Please see chapter 5.5.<br />
Suitable connectors:<br />
9 pin terminal block, 3.81mm grid<br />
e.g. Phoenix Contact order no. 1803646 or 1748040,<br />
Würth order no. 691 361 300 009<br />
Mating Connectors: 9 pin<br />
terminal block, pitch 3.81mm<br />
eg Phoenix Contact No. 1803646 or 1748040,<br />
Würth Art 691 361 300 009<br />
XLR Pin 1=ground, 2=+, 3=-<br />
Please note chapter 5.4.1.<br />
F Name plate Serial number, MAC address, exact device name<br />
G Ethernet ports Access to the network.<br />
All connections are equal.<br />
RJ45 IEEE 802.1<br />
10/100Mbps, half-or full-duplex (auto), auto<br />
detection of the polarity (no crossover cable<br />
required).<br />
CAT5 or higher recommended.<br />
Please note chapter 5.3.<br />
KLING & FREITAG GMBH © 2012 Revision 3.0 Page 12 of 65
Change language