LINEAR MOTION SOLUTIONS - Brd. Klee A/S
LINEAR MOTION SOLUTIONS - Brd. Klee A/S
LINEAR MOTION SOLUTIONS - Brd. Klee A/S
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Shafting - CC & CCPDL<br />
Ceramic Coated Aluminum<br />
CC - CERAMIC COATED - SOLID<br />
NOMINAL<br />
SHAFT<br />
SIZE<br />
DIAMETER<br />
TOLERANCE<br />
MAX.<br />
LENGTH<br />
WEIGHT<br />
Shafting - Ceramic Coated<br />
• Aluminum alloy base material<br />
• RC70 ceramic coated finish<br />
• Designed to run with Simplicity Frelon GOLD ® lined bearings<br />
• Non-magnetic and vibration resistant<br />
• Weld splatter, paints, contaminants will not stick<br />
CCPDL - CERAMIC COATED - PRE-DRILLED & TAPPED<br />
PART NO. (in.) MIN. MAX. (in.) (lbs./in.)<br />
CC03-xx 3/16 0.1863 0.1871<br />
0.003<br />
CC04-xx 1/4 0.2488 0.2496 0.005<br />
CC06-xx 3/8 0.3738 0.3746 0.010<br />
CC08-xx 1/2 0.4988 0.4996 0.019<br />
CC10-xx 5/8 0.6238 0.6246 0.030<br />
144<br />
CC12-xx 3/4 0.7488 0.7496 0.043<br />
CC16-xx 1 0.9988 0.9996 0.077<br />
CC20-xx 1-1/4 1.2488 1.2496 0.120<br />
CC24-xx 1-1/2 1.4987 1.4995 0.173<br />
CC32-xx 2 1.9985 1.9995 0.308<br />
NOTES: Specify length in part number using inches.<br />
Example: for 1/2" shafting total length 36" long = CC08-36.<br />
Ends of cut-to-length shafting are not coated.<br />
Fully coated shafting is available on special request.<br />
y<br />
x<br />
• Aluminum alloy base material<br />
• RC70 ceramic coated finish<br />
• Designed to run with Simplicity Frelon GOLD ® lined bearings<br />
• Interchanges with standard pre-drilled shafting<br />
• Non-magnetic and vibration resistant<br />
• Weld splatter, paints, contaminants will not stick<br />
NOMINAL<br />
SHAFT<br />
SIZE<br />
DIAMETER<br />
TOLERANCE<br />
HOLE<br />
SPACING<br />
THREAD<br />
MAX.<br />
LENGTH<br />
PART NO. (in.) MIN. MAX. x y (in.) (lbs./in.)<br />
CCPDL08-xx 1/2 0.4988 0.4996<br />
6-32 0.019<br />
4 2<br />
CCPDL10-xx 5/8 0.6238 0.6246 8-32 0.030<br />
CCPDL12-xx 3/4 0.7488 0.7496 10-32 0.043<br />
CCPDL16-xx 1 0.9988 0.9996 6 3 1/4-20 144 0.077<br />
CCPDL20-xx 1-1/4 1.2488 1.2496 5/16-18 0.120<br />
CCPDL24-xx 1-1/2 1.4987 1.4995 3/8-16 0.173<br />
8 4<br />
CCPDL32-xx 2 1.9985 1.9995 1/2-13 0.308<br />
NOTES: Specify length in part number using inches.<br />
Example: for 1/2" shafting total length 36" long = CCPDL08-36.<br />
Ends of cut-to-length shafting are not coated.<br />
Fully coated shafting is available on special request.<br />
Counterbore .063" from top.<br />
Customer specifies “y” dimension.<br />
WEIGHT<br />
66<br />
800.962.8979 • www.pbclinear.com
Change language