LINEAR MOTION SOLUTIONS - Brd. Klee A/S

RD DRAWER SLIDES
Drawer Slides - RD
Inch Series
• S-shape stainless steel frame
• Aluminum rail with embedded hardened steel raceway
• Sealed steel bearings
• Strokes range from 16" to 48"
Materials:
Carbon steel rollers
Hardened steel shafts & frame
Santoprene bumpers
Aluminum rail
Stainless steel hardware
HARDENED STEEL
SEALED BEARINGS
H
HARDENED SHAFTING
W
M
LOAD REDUCTION FACTOR
LOAD REDUCTION FACTOR VS. LOAD POSITION
1.2
1
0.8
0.6
0.4
0.2
0 0 0.2 0.4 0.6 0.8 1
LOAD POSITION ON DRAWER BEAM
STROKE/2
LENGTH
STROKE/2
Drawer Slide - RD
C
B
Working Temperatures: -20C to 120C (-4F to 248F)
• Oil impregnated wipers not only prevents the system from dust and particle intrusion, but also provide lubrication and extend life cycles.
• Elastomer end stops are not intended as stroke terminus; hard stops must be provided to limit the stroke
•Load rated for a pair of slides when the load is applied on the middle of drawer beams. A load reduction factor shall be used if the load is
applied toward the front of drawers.
NOTE: Load rated for a pair of slides when the load is applied on the middle of drawer beams. A load reduction factor shall be used if the load is applied toward the
front of drawers.
LENGTH STROKE CAPACITY PER PAIR
MOUNTING DATA
SCREW SIZE H W M WEIGHT
PART NUMBER
A B C
FOR
(in.) (in.) (N) (lbs.) (in.) (in.) (in.)
# OF HOLES MOUNTING
(in.) (in.) (in.) (lbs.)
RD30-0016 16.00 16.00 1,150 259 1.25 2.36 0.59 7 (#10) M5 3.1 .83 1.39 4.16
RD30-0018 18.00 18.00 1,265 285 1.10 2.36 0.38 8 (#10) M5 3.1 .83 1.39 5.32
RD30-0024 24.00 24.00 1,391 313 1.25 2.36 1.51 10 (#10) M5 3.1 .83 1.39 6.08
RD30-0036 36.00 36.00 1,489 335 1.25 2.36 1.71 15 (#10) M5 3.1 .83 1.39 8.95
RD30-0048 48.00 48.00 1,542 347 1.25 2.36 1.91 20 (#10) M5 3.1 .83 1.39 11.83
RD45-0018 18.00 18.00 3,158 710 1.75 2.36 2.08 7 (1/4") M6 4.3 1.12 2.05 7.7
RD45-0024 24.00 24.00 3,673 826 1.38 2.36 1.36 10 (1/4") M6 4.3 1.12 2.05 9.92
RD45-0036 36.00 36.00 3,919 881 1.38 2.36 1.55 15 (1/4") M6 4.3 1.12 2.05 14.36
RD45-0048 48.00 48.00 4,061 913 1.38 2.36 1.74 20 (1/4") M6 4.3 1.12 2.05 18.8
RD65-0024 24.00 24.00 6,585 1480 2.5 3.15 2.6 7 (1/4") M6 5.9 1.46 2.874 18.8
RD65-0036 36.00 36.00 8,145 1831 2.5 3.15 2 11 (1/4") M6 5.9 1.46 2.874 27.1
RD65-0048 48.00 48.00 8,765 1970 2.5 3.15 1.4 15 (1/4") M6 5.9 1.46 2.874 35.4
ORDER INFORMATION
RD XX
_
XXXX
_
A
B
X
LOAD
C
EXAMPLE: RDXX-XXXX-X
Redi-Rail Drawer Slide
Size
30, 45, 65
L= Left Hand
R= Right Hand
Lengths (in.)
0016 (RD30), 0018, 0024, 0036, 0048
212
800.962.8979 • www.pbclinear.com