BE Mechanical 2003 Structure - K. K. Wagh Education Society

part list and overall dimensions and the other sheet involving drawings of
individual components, manufacturing tolerances, surface finish symbols and
geometric tolerances should be specified so as to make it working drawing. A
design report giving all necessary calculations of the design of components
and assembly should be submitted in a separate file. Projects shall be in the
form of design of mechanical systems involving design of Bevel/Worm gear
box or design of pressure vessel using IS 2825 code.
Three assignments based on any one of the following topics from each of the
three groups.
Group I : Sr. No.1 to 4, group II : Sr. No.5 to 8, Group III : Sr. No.9 to 12.
1. Modem engineering materials and their applications/ evaluation methods for
material selection.
2. Piping design.
3. Product design involving ergonomic and aesthetic considerations.
4. Cost estimation of a product.
5. Value engineering.
6. Concurrent engineering.
7. Reverse engineering.
8. Design for manufacturing and assembly.
9. Designing for environment.
10. Designs in relation to patents, trade mark and copy right..
11. Requirements of design office as per 1.5.0. 9000.
12. Communicating the design.
(Note: The above topics are restricted to assignment only and do not form part of
syllabus of theory paper).
Recommendation