99811881; UFO®compact - Signal processing system - Kathrein
99811881; UFO®compact - Signal processing system - Kathrein
99811881; UFO®compact - Signal processing system - Kathrein
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Transmodulator/multiplexer DVB-S(2) – DVB-T<br />
UFO 333/MX<br />
20610110<br />
DVB-S/HDTV channel unit for installation into the<br />
UFO ® compact (extension) module carriers UFG 3xx/4xx<br />
To process signals from two DVB-S (or HDTV)<br />
transponders into a COFDM output signal<br />
Enables selection of individual programmes from two<br />
QPSK modulated DVB-S signals (or 8PSK modulated<br />
DVB-S(2) signals), multiplexing of both transport<br />
streams and transmodulation of these into a COFDMmodulated<br />
output channel<br />
Two inputs A/B, settable using the central control unit<br />
(e.g. for H/V switching and to create the cable-NIT for<br />
two polarisations)<br />
DiSEqC to control external DiSEqC multi-switches<br />
(one can only use DiSEqC matrices with eight Sat-IF<br />
inputs (two satellites))<br />
COFDM<br />
All essential transmission parameters can be set using<br />
the central control unit<br />
The output level can be set and switched off using the<br />
control unit<br />
Adjacent channel compatible<br />
MPEG transport stream processor:<br />
To set a constant output data rate (Stuffing) with<br />
PCR correction<br />
With programme fi lter to remove individual TV and<br />
radio programmes (easy setting using the USW 30 and<br />
UFX 314)<br />
For NIT matching (cable NIT; UFX 314 additionally<br />
required)<br />
For CAT conversion (insertion of an operator ID)<br />
LCN-capable (if used together with UFX 314 and<br />
USW 30)<br />
COFDM modulator for modulation type 2k, mapping<br />
QPSK, 16 QAM, 64 QAM<br />
FPGA designed MPEG transport stream processor<br />
and COFDM modulator<br />
Source of EPG data can be switched between input A<br />
and input B (from software version V 04)<br />
Extendable with UFZ 394 Common Interface retrofi t set<br />
for insertion of two CA modules (input A; as of software<br />
version V 02)<br />
Software updates using control unit’s interface<br />
Required central control unit software version:<br />
at least V 9.40<br />
Ambient temperature range for operation in:<br />
- module carrier with extractor fan (UFG 412):<br />
-20 to +50 °C<br />
- (extension) module carrier without extractor fan<br />
(UFG 3xx): -20 to +40 °C<br />
Dimensions (W x H x D) in mm: 265 x 27 x 170<br />
Packing unit/weight (pc./kg): 1/1.0<br />
30<br />
UFO ® compact signal <strong>processing</strong> <strong>system</strong>
Change language