Ethernet Communication Module IFD9506
Ethernet Communication Module IFD9506
Ethernet Communication Module IFD9506
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Ethernet</strong> <strong>Communication</strong> <strong>Module</strong> <strong>IFD9506</strong><br />
11 Application Example – WPLSoft<br />
You can set up <strong>IFD9506</strong> by WPLSoft software. See the examples below for how to set up the communication<br />
connection. Columns in every setup page in WPLSoft are the same as those in DCISoft. Please refer to section<br />
10 for relevant settings.<br />
11.1 Setting up IP through WPLSoft<br />
Application<br />
Steps<br />
Setting up network parameters of <strong>IFD9506</strong> directly from the PC.<br />
(1) The IP of the PLC executing WPLSoft is “192.168.1.2”.<br />
(2) Subnet mask: 255.255.255.0; Gateway: 192.168.1.254<br />
(3) Modify the network parameter of <strong>IFD9506</strong>.<br />
(4) Connecting the PC and <strong>IFD9506</strong> by RJ-45 network cable.<br />
Note: Both PC and <strong>IFD9506</strong> cannot adopt DHCP but static IP.<br />
1. The connections:<br />
2. Open “<strong>Communication</strong> Setting” in WPLSoft.<br />
52<br />
DVP-PLC Application Manual
Change language