Ethernet Communication Module IFD9506
Ethernet Communication Module IFD9506
Ethernet Communication Module IFD9506
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Ethernet</strong> <strong>Communication</strong> <strong>Module</strong> <strong>IFD9506</strong><br />
9.6 Returning to Default Settings<br />
You can easily return all the settings to default ones on the page after you have modified those settings several<br />
times.<br />
• How to return to default settings<br />
Check “Factory Setting” and press (Y), all the settings in <strong>IFD9506</strong> will return to default<br />
settings.<br />
Note:<br />
Returning all the settings in <strong>IFD9506</strong> to default ones through RS-232 COM port can be done no<br />
matter <strong>IFD9506</strong> is locked by the password or not. The entire process will take approximately 10<br />
seconds, and please DO NOT switch off the power during this 10 seconds. To return to default<br />
settings, you can also press the “Reset” button for 2 seconds.<br />
9.7 Monitor Table<br />
By setting up <strong>IFD9506</strong>, you will be able to read data in specific addresses on the network and store the data<br />
temporarily in <strong>IFD9506</strong>. This realizes fast data storage and retrieval.<br />
• How to monitor master<br />
34<br />
DVP-PLC Application Manual