Ethernet Communication Module IFD9506

More documents

Recommendations

Info

Ethernet Communication Module IFD9506 Function code Explanation Devices supported 0x10 Write multiple holding registers BR, AL, MB, MW, MIP 0x17 Read/write multiple holding registers BR, AL, MB, MW, MIP 7.2 Exception Codes Supported Exception code 0x01 0x02 0x03 0x04 0x0A 0x0B Explanation Illegal function Illegal data addresss Illegal data value Slave device failure Gateway path unavailable Gateway target device failed to respond 7.3 Device Type & Device Address Device type Modbus address (Hex) Discrete input 5-digit Modbus address (Dec) 6-digit Modbus address (Dec) RX 0x0400 ~ 0x0402 11025 ~ 11027 101025 ~ 101027 3 Device type Modbus address (Hex) Holding register 5-digit Modbus address (Dec) 6-digit Modbus address (Dec) Number Number BR 0x0000 ~ 0x00FF 40001 ~ 40256 400001 ~ 400256 64 AL 0x0200 ~ 0x0202 40513 ~ 40515 400513 ~ 400515 3 MB 0x2000 ~ 0x20FF 48193 ~ 48448 408193 ~ 408448 256 MW 0x2200 ~ 0x23FF 48705 ~ 49216 408705 ~ 409216 512 MIP 0x2400 ~ 0x24FF 49217 ~ 49471 409217 ~ 409471 256 8 Setting up Software This section gives instructions on how to set up IFD9506 by DCISoft and explanations on each setup page. IFD9506 is set up by UDP port 20006; therefore, you have to be aware of the relevant settings of the firewall. See the explanations below on the software. 8.1 Setting up Communication & Searching for Modules in DCISoft • Broadcast search 1. Open DCISoft on the PC and click on the “IP Search” icon. 16 DVP-PLC Application Manual
Ethernet Communication Module IFD9506 2. You will see the network modules found. DVP-PLC Application Manual 17
Page 1: IFD9506 Ethernet Communication Modu
Page 4 and 5: Ethernet Communication Module IFD95
Page 62: Ethernet Communication Module IFD95

Ethernet Communication Module IFD9506

Create successful ePaper yourself

Delete template?

Save as template?