DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
2. By using PLC-Link, D1038 can be set to send next communication data with delay. Unit: 1
scan cycle. 0~10,000 adjustable
Function Group
Number
Contents:
Fixed scan time
M1039, D1039
1. When M1039 is ON, program scan time is determined by D1039. When program execution is
completed, next scan will be activated only when the fixed scan time is reached. If D1039 is
less than actual scan time, it will scan by the actual program scan time.
M1000
M1039
Fix scan time
normally ON
contact MOV P K20 D1039
Scan time is fixed to 20ms
2. Instructions related to scan time, RAMP, HKY, SEGL, ARWS and PR should be used with
“fixed scan time” or “timed interrupt”.
3. Particularly for instruction HKY, which is applied for 16-keys input operated by 4x4 matrix,
scan time should be set to 20ms or above.
4. Scan time displayed in D1010~D1012 also includes fixed scan time.
Function Group
Number
Contents:
Analog Function built in the PLC
D1062, D1110~D1113, D1116~D1118
1. The function is for EX2/SX2 Only
2. Resolution of AD (analog input) channels: 12 bits for 20EX2 and 20SX2; 16 bits for the
voltage/current mode of 30EX2; 0.1 ℃ for the temperature mode of 30EX2
3. The analog input signals and their corresponding digital values:
Model
Mode
20EX2/SX2
30EX2
-10 V~+10 V -2000~+2000 -32000~+32000
Voltage -5 V~+5 V Not support -32000~+32000
+ 1 V~+5 V Not support +0~+32000
Current
-20 mA~+20 mA -2000~+2000 -32000~+32000
+4 mA~+20 mA +0~+2000 + 0~+32000
Temperature
PT100/PT1000
-180 ℃~ +800 ℃
Not support -1800~+8000
NI100/NI1000
-80 ℃ ~ +170 ℃
Not support -800~+1700
4. R esolution of DA (analog output) channels: 12 bits
2-66