DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

3. Instruction Set
API Mnemonic Operands Function
267 D BSET Set ON Specified Bit of a Word
Controllers
ES2/EX2 SS2 SA2 SX2
SE
Type
Bit Devices Word devices Program Steps
OP X Y M S K H KnX KnY KnM KnS T C D E F
D * * * * * *
n * * * * * * * * * * *
BSET: 5 steps
DBSET: 9 steps
PULSE 16-bit 32-bit
ES2/EX2 SS2 SA2
SA2
SA2
SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2
SE SE SE SX2
Operands:
D: Destination device to be Set ON n: Device specifying the bit to be Set ON
Explanations:
1. For ES2/EX2 models, only V1.20 or above supports the function.
2. Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit
instruction.
3. When BSET instruction executes, the output device specified by operand n will be ON and
latched. To reset the ON state of the device, BRST instruction is required.
Program Example:
X0
X1
BSET K4Y0 D0
Instruction: Operation:
LDI X0 Load NC contact X0
AND X1 Connect NO contact
X1 in series.
BSET K4Y0 D0 When D0 = k1,
Y1 is ON and latched
When D0 = k2,
Y2 = ON and latched
3-475