DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
Special
M
Function
OFF
ES2
SS2 SA2 SX2
EX2
ON
STOP
RUN
RUN
STOP
Attrib. Latch
-ed
Default
M1086
M1088
M1089
M1090
M1091
M1092
M1093
M1094
M1095
Enabling password function for DVP-
PCC01
Matrix comparison.
Comparing between equivalent values
(M1088 = ON) or different values (M1088
= OFF).
Indicating the end of matrix comparison.
When the comparison reaches the last bit,
M1089 = ON.
Indicating start of matrix comparison.
When the comparison starts from the first
bit, M1090 = ON.
Indicating matrix searching results. When
the comparison has matched results,
comparison will stop immediately and
M1091 = ON.
Indicating pointer error. When the pointer
Pr exceeds the comparison range, M1092
= ON
Matrix pointer increasing flag. Adding 1 to
the current value of the Pr.
Matrix pointer clear flag. Clear the current
value of the Pr to 0
Carry flag for matrix rotation / shift /
output.
○ ○ ○ ○ OFF - - R/W NO OFF
○ ○ ○ ○ OFF OFF - R/W NO OFF
○ ○ ○ ○ OFF OFF - R NO OFF
○ ○ ○ ○ OFF OFF - R NO OFF
○ ○ ○ ○ OFF OFF - R NO OFF
○ ○ ○ ○ OFF OFF - R NO OFF
○ ○ ○ ○ OFF OFF - R/W NO OFF
○ ○ ○ ○ OFF OFF - R/W NO OFF
○ ○ ○ ○ OFF OFF - R NO OFF
M1096 Borrow flag for matrix rotation/shift/input ○ ○ ○ ○ OFF OFF - R/W NO OFF
M1097
M1098
Direction flag for matrix
rotation/displacement
Counting the number of bits which are “1”
or “0”
○ ○ ○ ○ OFF OFF - R/W NO OFF
○ ○ ○ ○ OFF OFF - R/W NO OFF
M1099 ON when the bits counting result is “0” ○ ○ ○ ○ OFF OFF - R/W NO OFF
M1102*
Y2/CH1 (Y2, Y3) pulse output execution
completed
○ ○ ○ ○ OFF - - R/W NO OFF
M1103* Y3 pulse output completed ○ ○ ○ ○ OFF - - R/W NO OFF
M1104
Y2/CH1 (Y2, Y3) pulse output pause
(immediate)
○ ○ ○ ○ OFF OFF - R/W NO OFF
M1105 Y3 pulse output pause (immediate) ○ ○ ○ ○ OFF OFF - R/W NO OFF
M1106
M1107
M1108
Zero point selection. M1106=ON, change
the zero point to the right of DOG switch
for zero return on CH0.
Zero point selection. M1107=ON, change
the zero point to the right of DOG switch
for zero return on CH1.
Y0/CH0 (Y0, Y1) pulse output pause
(ramp down)
○ ○ ○ ○ OFF OFF - R/W NO OFF
○ ○ ○ ○ OFF OFF - R/W NO OFF
○ ○ ○ ○ OFF OFF - R/W NO OFF
2-20