DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
API Mnemonic Operands Function
166 TRD P Time read
Controllers
ES2/EX2 SS2 SA2
SE
SX2
Type
Bit Devices Word devices Program Steps
OP X Y M S K H KnX KnY KnM KnS T C D E F
D * * *
Operand:
D: Current time of RTC (occupies 7 consecutive devices)
TRD, TRDP: 3 steps
PULSE 16-bit 32-bit
ES2/EX2 SS2 SA2
SA2
SA2
SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2
SE SE SE SX2
Explanations:
1. TRD instruction reads the 7 real-time data of RTC (year (A.D.), day(Mon.Sun.), month, day,
hour, minute, second from D1319~D1313 and stores the read data in registers specified by D.
2. Only when power is on can RTCs of SS2 series perform the fuction of timing. The RTC data
registers D1319~D1313 are latched. When power is resumed, the RTC will resume the stored
time value before power down. Therefore, we suggest users modify the RTC value every time
when power is ON.
3. RTCs of SA2/SE V1.0 及 ES2/EX2/SX2 V2.0 series can still operate for one or two weeks after
the power is off (they vary with the ambient temperature). Therefore, if the machine has not
operated since one or two weeks ago, please reset RTC.
4. D1319 only stores the 2-digit year in A.D. If 4-digit year data is required, please refer to Points
to note below.
5. For relative flags and registers please refer to Points to note.
Program Example:
When X0 = ON, TRD instruction reads the current time of RTC to the specified register D0~D6.
The content of D1318: 1 = Monday; 2 = Tuesday … 7 = Sunday.
X0
TRD
D0
Special D Item Content Normal D Item
D1319 Year (A.D.) 00~99 → D0 Year (A.D.)
D1318 Day (Mon.~Sun.) 1~7 → D1 Day (Mon.~Sun.)
D1317 Month 1~12 → D2 Month
D1316 Day 1~31 → D3 Day
D1315 Hour 0~23 → D4 Hour
D1314 Minute 0~59 → D5 Minute
D1313 Second 0~59 → D6 Second
3-382