DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
• This instruction can be used many times in user program, but only one instruction will be
activated at a time. For example, if Y0 is currently activated, other instructions use Y0
won’t be executed. Therefore, instructions first activated will be first executed.
• After activating the instruction, all parameters cannot be modified unless instruction is
OFF.
3. Associated Flags:
M1029 CH0 (Y0, Y1) pulse output execution completed.
M1102
M1078
M1104
M1108
M1110
M1156
M1158
M1305
M1306
M1347
M1524
M1534
CH1 (Y2, Y3) pulse output execution completed
CH0 (Y0, Y1) pulse output pause (immediate)
CH1 (Y2, Y3) pulse output pause (immediate)
CH0 (Y0, Y1) pulse output pause (ramp down).
CH1 (Y2, Y3) pulse output pause (ramp down)
Enabling the mask and alignment mark function on I400/I401(X4) corresponding
to Y0.
Enabling the mask and alignment mark function on I600/I601(X6) corresponding
to Y2.
Reverse Y1 pulse output direction in high speed pulse output instructions
Reverse Y3 pulse output direction in high speed pulse output instructions
Auto-reset Y0 when high speed pulse output completed
Auto-reset Y2 when high speed pulse output completed
Enable ramp-down time setting on Y0. Has to be used with D1348
M1535 Enable ramp-down time setting on Y2. Has to be used with D1349.
M1538 Indicating pause status of CH0 (Y0, Y1)
M1540 Indicating pause status of CH1 (Y2, Y3)
4. Special D registers:
D1030
D1031
D1336
D1337
Low word of the present value of Y0 pulse output
High word of the present value of Y0 pulse output
Low word of the present value of Y2 pulse output
High word of the present value of Y2 pulse output
D1340 Start/end frequency of the 1st group pulse output CH0 (Y0, Y1)
D1352 Start/end frequency of the 2nd group pulse output CH1 (Y2, Y3)
D1343 Ramp up/down time of the 1st group pulse output CH0 (Y0, Y1)
D1353 Ramp up/down time of the 2nd group pulse output CH1 (Y2, Y3)
D1348: CH0(Y0, Y1) pulse output. When M1534 = ON, D1348 stores the ramp-down time
D1349: CH1(Y2, Y3) pulse output. When M1535 = ON, D1349 stores the ramp-down time
3-372