DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
API Mnemonic Operands Function
125 D LN P Float natural logarithm operation
Controllers
ES2/EX2 SS2 SA2
SE
SX2
Type
Bit Devices Word devices Program Steps
OP X Y M S K H KnX KnY KnM KnS T C D E F
S * * *
D *
Operands:
S: Source device D: Operation result
DLN, DLNP: 9 steps
PULSE 16-bit 32-bit
ES2/EX2 SS2 SA2
SA2
SA2
SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2
SE SE SE SX2
Explanations:
1. Perform natural logarithm (LN) operation on operand S:
LN[S +1, S ]=[ D +1, D ]
2. Only a positive number is valid for S. Register D has to be 32-bit format. Operation is
conducted in floating point value, so the value in S needs to be converted into floating value
before natural logarithm operation.
3. e D = S. The content of D = LN S, where the value in S is specified by users.
4. Flags: M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag).
If absolute value of the result is larger than max. floating value, carry flag M1022 = ON.
If absolute value of the result is smaller than min. floating value, borrow flag M1021 = ON.
If the conversion result is 0, zero flag M1020 = ON
Program Example:
1. When M0 = ON, convert (D1, D0) to binary floating value and save the result in (D11, D10).
2. When M1= ON, perform natural logarithm operation with (D11, D10) as the antilogarithm. The
value is saved in register (D21, D20) in binary floating format.
3. When M2 = ON, convert the value in (D21, D20) into decimal floating point value and save the
result in (D31, D30). (At this time, D31 indicates powers of 10 for D30)
M0
RST
M1081
M1
M2
DFLT D0 D10
DLN D10 D20
DEBCD D20 D30
3-308