DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

3. Instruction Set
API Mnemonic Operands Function
96 TMR Timer
Controllers
ES2/EX2 SS2 SA2 SX2
SE
Type Bit Devices Word devices Program Steps
OP X Y M S K H KnX KnY KnM KnS T C D E F TMR: 5 steps
S 1 *
S 2 * *
PULSE 16-bit 32-bit
ES2/EX2 SS2 SA2
SA2
SA2
SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2
SE SE SE SX2
Operands:
S 1 : No. of timer (T0~T255) S 2 : Set value (K0~K32,767, D0~D9,999)
Explanations:
When TMR instruction is executed, the specific coil of timer is ON and the timer is enabled. When
the set value of timer is achieved, the associated NO/NC contact will be driven.
Program example:
Ladder Diagram:
X0
TMR
T5
K1000
Instruction Code:
Operation:
LD X0 ; Load NO contact X0
TMR T5 K1000 ; T5 timer setting is K1000
3-263