DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

3. Instruction Set
Program Example 1:
EI
FEND
I 001
M1000
SET
M1347
DPLSY K1000 K1000 Y0
IRET
I 101
M1000
SET
M1524
DPLSY K1000 K1000 Y2
IRET
END
Explanations:
a) Whenever I001 is triggered, Y0 will output 1,000 pulses; whenever I101 is triggered, Y2 will
output 1,000 pulses.
b) When pulse output is completed, there should be an interval of at least one scan cycle
before next pulse output operation is triggered. .
Program Example 2:
X1
X2
SET
M1347
PLSY K1000 K1000 Y0
END
Explanation:
When both X1 and X2 are ON, Y0 pulse output will operate continuously. However, there will be a
delay of approx. 1 scan cycle every 1000 pulses.
3-141