DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/SA2/SS2/SA2/SX2/SE Operation Manual - Programming
API Mnemonic Operands Function
13 SMOV P
Shift
Move
Controllers
ES2/EX2 SS2 SA2
SE SX2
Type Bit Devices Word devices Program Steps
OP X Y M S K H KnX KnY KnM KnS T C D E F SMOV, SMOVP: 11 step
S * * * * * * * * *
m 1 * *
m 2 * *
D * * * * * * * *
n * *
PULSE 16-bit 32-bit
SA2
SA2
SA2
ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2
SE
SE
SE
Operands:
S: Source device m 1 : Start digit to be moved from source device m 2 : Number of digits to be
moved D: Destination device n: Start digit of the destination device for the moved digits
Explanation:
1. This instruction is able to re-allocate or combine data. When the instruction is executed, m 2
digits of contents starting from digit m 1 (from high digit to low digit) of S will be sent to m 2
digits starting from digit n (from high digit to low digit) of D.
2. M1168 is used for designating SMOV working mode. When M1168 = ON, the instruction is in
BIN mode. When M1168 = OFF, the instruction is in BCD mode.
Points to note:
1. The range of m 1 : 1 – 4
2. The range of m 2 : 1 – m 1
3. The range of n: m 2 – 4
SX2
3-64